Ubuntu-fr

raspouille

[resolu] k3b edgy

probleme d'effacement cdrw,dvdrw de k3b.

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.6
Kernel:      2.6.17-10-generic
Devices
-----------------------
TSSTcorp DVD-ROM SH-D162C TS04 (/dev/hdc, ) at /media/cdrom0 [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]

HL-DT-ST DVDRAM GSA-4081B A100 (/dev/hdd, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdd speed=16 -tao driveropts=burnfree -eject blank=fast -force

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.17-10-generic

/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4081B'
Revision       : 'A100'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 10897 kB/s 61x CD 7x DVD
/usr/bin/X11/cdrecord: Trying to use ultra high speed+ medium on a writer which is not
compatible with ultra high speed+ media.
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 0
  Reference speed: 0
  Is not unrestricted
  Is erasable
  Disk sub type: Ultra High speed+ Rewritable media (3)
  ATIP start of lead in:  -11075 (97:34/25)
  ATIP start of lead out: 359849 (79:59/74)
  2T speed low:  8 2T speed high: 32
  power mult factor: 0 0
  recommended erase/write power: 0
  A1 values: 00 00 80
  A2 values: 39 80 00
  A3 values: 04 C4 B8
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation

@ trouver l'erreur.

Dernière modification par raspouille (Le 19/10/2006, à 01:16)

---

Linux Mint Mate 17.3 GNU/Linux.

mr_pouit

Re : [resolu] k3b edgy

Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted

ça peut-être ?

raspouille

Re : [resolu] k3b edgy

en root,c'est pareil.

---

Linux Mint Mate 17.3 GNU/Linux.

raspouille

Re : [resolu] k3b edgy

   resolu,je suis sous dapper,et j'ai viré la bêta edgy.

---

Linux Mint Mate 17.3 GNU/Linux.

mr_pouit

Re : [resolu] k3b edgy

Ça ne résoud pas pour autant ce bug...

raspouille

Re : [resolu] k3b edgy

Le bug,c'est cdrecord...

---

Linux Mint Mate 17.3 GNU/Linux.

pfff

Re : [resolu] k3b edgy

ouais et tu as fait quoi pour résoudre ton probleme ?

---

Développeur Web