Ubuntu-fr

coubi64

Carte WIFI D-Link DWL-G520+ en WPA sous Edgy ne fonctionne pas....

Ma carte DWL-G520+ ne fonctionne pas en cryptage WPA sous Edgy (configuration: FREEBOX V5 / Network Manager).

Voici l'erreur que je trouve dans les logs:

Sep 28 12:21:10 PC-bureau kernel: [17179594.188000] wlan0: tx error 0x20, buf 03! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry')
Sep 28 12:21:10 PC-bureau kernel: [17179595.820000] ACPI: Power Button (FF) [PWRF]
Sep 28 12:21:10 PC-bureau kernel: [17179595.820000] ACPI: Power Button (CM) [PWRB]
Sep 28 12:21:10 PC-bureau kernel: [17179595.948000] pcc_acpi: loading...
Sep 28 12:21:10 PC-bureau kernel: [17179596.344000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:11 PC-bureau kernel: [17179598.148000] NET: Registered protocol family 10
Sep 28 12:21:11 PC-bureau kernel: [17179598.148000] lo: Disabled Privacy Extensions
Sep 28 12:21:11 PC-bureau kernel: [17179598.148000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 28 12:21:11 PC-bureau kernel: [17179598.148000] IPv6 over IPv4 tunneling driver
Sep 28 12:21:11 PC-bureau hpiod: 1.6.7 accepting connections at 2208... 
Sep 28 12:21:11 PC-bureau kernel: [17179598.844000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:12 PC-bureau kernel: [17179599.668000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Sep 28 12:21:12 PC-bureau kernel: [17179599.668000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Sep 28 12:21:12 PC-bureau kernel: [17179599.668000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Sep 28 12:21:13 PC-bureau kernel: [17179600.608000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 28 12:21:13 PC-bureau kernel: [17179600.608000] apm: disabled - APM is not SMP safe.
Sep 28 12:21:14 PC-bureau kernel: [17179601.344000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:14 PC-bureau kernel: [17179601.348000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:16 PC-bureau kernel: [17179603.848000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:16 PC-bureau kernel: [17179603.848000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:19 PC-bureau kernel: [17179606.344000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:21 PC-bureau kernel: [17179608.852000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:21 PC-bureau kernel: [17179608.856000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:24 PC-bureau kernel: [17179611.592000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:24 PC-bureau kernel: [17179611.592000] wlan0: association FAILED: peer sent response code 12 (Assoc denied (reason outside of 802.11b scope), maybe MAC filtering by peer?)
Sep 28 12:21:26 PC-bureau dhcdbd: Started up.
Sep 28 12:21:29 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep 28 12:21:29 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep 28 12:21:31 PC-bureau kernel: [17179618.956000] wlan0: tx error 0x20, buf 11! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry')
Sep 28 12:21:34 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Sep 28 12:21:34 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name
Sep 28 12:21:34 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Sep 28 12:21:34 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Sep 28 12:22:16 PC-bureau kernel: [17179663.444000] hda: DMA timeout retry
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): starting (version 2.14.0), pid 4914 user 'frederic'
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): Resolved address "xml:readwrite:/home/frederic/.gconf" to a writable configuration source at position 1
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Sep 28 12:22:51 PC-bureau gconfd (frederic-4914): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Sep 28 12:22:56 PC-bureau gconfd (frederic-4914): Resolved address "xml:readwrite:/home/frederic/.gconf" to a writable configuration source at position 0
Sep 28 12:27:17 PC-bureau exiting on signal 15
Sep 28 12:27:18 PC-bureau syslogd 1.4.1#18ubuntu5: restart.
Sep 28 12:28:01 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/wlan0 for sub-path wlan0.dbus.get.reason
Sep 28 12:29:16 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Sep 28 12:29:16 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name
Sep 28 12:29:16 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Sep 28 12:29:16 PC-bureau dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Sep 28 12:29:29 PC-bureau kernel: [17180096.616000] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Est ce que ça vous dit quelque chose?

Mon noyau est le :

frederic@PC-bureau:~$ uname -a
Linux PC-bureau 2.6.17-10-generic #2 SMP Tue Sep 26 16:53:47 UTC 2006 i686 GNU/Linux
frederic@PC-bureau:~$

neoguet

Re : Carte WIFI D-Link DWL-G520+ en WPA sous Edgy ne fonctionne pas....

salut

j'ai la meme carte que toi et quand je suis passé sous edgy, j'ai le meme probleme (ou presque)
Pour moi c'est un probleme ACPI

Dans "/boot/grub/menu.lst"  j'ai modifié la ligne kernel

kernel		/boot/vmlinuz-2.6.17-10-generic root=UUID=7d7886a1-33fb-4e0c-972f-373cfa7ff441 ro quiet splash noapic nolapic

voila

si ca peut t'aider

rico69

Re : Carte WIFI D-Link DWL-G520+ en WPA sous Edgy ne fonctionne pas....

Bonjour,

Si tu utilises le module acx110, oublies le et utilise ndiswrapper à la place. En effet, acx n'implémente pas WPA. Avec ndiswrapper + network-manager, pas de problème.

---

Pentium IV 524 - 1 Go DDR2 - XP & Ubuntu 8.04

coubi64

Re : Carte WIFI D-Link DWL-G520+ en WPA sous Edgy ne fonctionne pas....

Le seul souci, c'est de devoir recompiler lors d'un changement de noyau....

rico69

Re : Carte WIFI D-Link DWL-G520+ en WPA sous Edgy ne fonctionne pas....

Le seul souci, c'est de devoir recompiler lors d'un changement de noyau....

Je suis sous Edgy également et je n'ai rien eu à compiler. ndiswrapper-1.8, wpa_supplicant, network-manager tous les 3 dans Synaptic, et roulez jeunesse!

Contrairement au temps où j'étais sous Dapper, je n'ai eu aucune mise à jour de noyau de suggérée sur ma Edgy (ceci explique peut-être cela?)

Cela dit, ma Edgy est pratiquement "out of the box" et tu as peut-être des contraintes que j'ignore...

---

Pentium IV 524 - 1 Go DDR2 - XP & Ubuntu 8.04