Pages : 1
#1 Le 10/02/2007, à 21:55
- teolemon
(A oublier)
A Oublier, j'ai fait une simple erreur de newbie: les ATI renvoient un signal négatif par dfaut lors des tests quand on est en serveur XGL (paf, lire mieux la doc paf, ne pas lire la doc comme tu lis tes bouquins d'IP , cad en diagonale paf)
A xorg.conf égaux sur edgy et feisty (et à sessions égales), j'ai sur Edgy du beryl qui marche, fgl_glxgears et glxinfo contents. De plus autodetection de ma carte sans pb lors d'un reconfigure.
Sur Feisty (après avoir essayé de manière classique), pas d'autodetection lors du reconfigure, aucun des test qui ne marche, et après que j'aie essayé de faire un copier/coller de mon xorg.conf sous Edgy, il n'y a rien de mieux.
Ca ressemble fort à une régression , mais je voudrais votre avis avant de m'avancer.
Par acquis de conscience avant de remplir un bug sur Launchpad, "v'là le bouzin"
Ma carte est une X1300 ATI
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
Il y a de bugs sur Launchpad qui correspondent à certains symptomes pour le driver libre, mais je suis passé au proprio.Il faut dire que la carte, sous Drivers libres ou non s'est toujours comportée de manière bizarre (Freeze entre le Ctrl Alt Backspace et le retour de GDM, une ligne horizontale surant le Bootscreen...
https://bugs.launchpad.net/ubuntu/+bugs?field.searchtext=ATI+Mobility+Radeon+X1300&orderby=-importance&search=Search&field.status%3Alist=Unconfirmed&field.status%3Alist=Confirmed&field.status%3Alist=In+Progress&field.status%3Alist=Needs+Info&field.status%3Alist=Fix+Committed&field.assignee=&field.owner=&field.omit_dupes=on&field.has_patch=&field.has_no_package=
Le Xorg d'Edgy et desormais de Feisty
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. ATI Default Card"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. ATI Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSectionCe que me crache Feisty:
pierre@*******:~$ glxinfo | grep "direct rendering"
Xlib: extension "XFree86-DRI" missing on display ":1.0".
direct rendering: No
pierre@*********:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
Xlib: extension "XFree86-DRI" missing on display ":1.0".
Error: couldn't get fbconfigA Oublier, j'ai fait une simple erreur de newbie: les ATI renvoient un signal négatif par dfaut lors des tests quand on est en serveur XGL (paf, lire mieux la doc paf, ne pas lire la doc comme tu lis tes bouquins d'IP , cad en diagonale paf)
Dernière modification par teolemon (Le 10/02/2007, à 22:45)
I'm a bun, but you bun too!
Aidez-nous à traduire Ubuntu Trusty Tahr (doc, applis, descriptions d'applis, pages web) en français >> http://doc.ubuntu-fr.org/ubuntu-l10n-fr
Hors ligne
Pages : 1