#1 Le 28/04/2007, à 23:02
- Quentin 878
Résolution 12
Bonjour à tous.
Je sais que c'est pas la première fois qu'on vous demande ça mais je m'en sort pas avec la doc et mon fichier xorg.conf. J'aimerais avoir une résolution de 1280x800 sur mon portable "Fujitsu Siemens Amilo M 1450G". Je suis sous Ubuntu Feisty. Mon écran est je pense WXGA donc ça devrait aller mais on ne me propose pas la résoltution que je veux dans les préférences.
Que puis-je faire?
XORG.CONF :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
#2 Le 29/04/2007, à 17:00
- Quentin878
Re : Résolution 12
Personne pr me donner un éclaircissement?
Quentin
Hors ligne
#3 Le 29/04/2007, à 20:41
- Quentin8787
Re : Résolution 12
Up?
(je suis obligé d'écrire en non-enregistré car sur la page d'accueil, je le suis mais dès que je clique sur "Forum", je le suis plus :s !!??)
#4 Le 30/04/2007, à 20:54
- Quentin878
Re : Résolution 12
UP (le dernier promis)?
AAAH ca marche, je peux écrire en étant loggé maintenant.
Quentin
Hors ligne
#5 Le 30/04/2007, à 23:07
- Quentin878
Re : Résolution 12
AAAAAHHHH pfff ça fait des jours et des jours que je retourne la doc, surfe sur des sites, modifie à tout va mon xorg.conf et puis je viens de m'apercevoir que j'ai un chipset i915 et que vois-je sur http://doc.ubuntu-fr.org/materiel/fix_p … _serie_915
Mon chipset rencontrant des problèmes (c'est le moins que l'on puisse dire), un paquet a tout spécialement été conçu pour lui :-) qu'il suffit d'installer comme ceci :
sudo apt-get install 915resolution
Je suis content :-)
Quentin
Hors ligne