#251 Le 30/04/2012, à 12:20
- Ex0artefact
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Bizarre, vous avez dit bizarre ?
Hors ligne
#252 Le 06/05/2012, à 18:57
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Mon pekwm: http://forum.ubuntu-fr.org/viewtopic.ph … 1#p8558681
A+
Hors ligne
#253 Le 07/05/2012, à 21:42
- RegisBurin
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Ex0artefact a écrit :
Livarp, avec Wmfs2...
Gros merci pour Livarp (que je ne connaissais pas), je me cherchais une distro compiz-standalone sans trop de blobs et de bordel dedans... je l'ai trouvé là-bas 
(et j'en ai profité pour -enfin- tester dwm aussi)
@+
Config (M-AUDIO Delta44/Wacom CTH661-Phone ZTE OpenC-FFOS2.1) | BabyBox[WIP]
Moi sur le web / Moi, IRL mais sur le web / Ma maison sur le web
Hors ligne
#254 Le 17/05/2012, à 20:43
- fredr
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Fana du distro hopping, actuellement sur Ubuntu 24.04 ...
L'optimiste pense que nous vivons dans le meilleur des mondes. Et le pessimiste craint que ce ne soit exact.
Hors ligne
#255 Le 18/05/2012, à 01:48
- lei00
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Tres joli "fredr" , pourrais savoir quel est le theme d'icone stp ?
FredBezies : Sites d'information sur l'actualité GNU/Linux.
Mon DeviantArt : Site d'une communauté artistique en ligne qui partage ses travaux.
Hors ligne
#256 Le 18/05/2012, à 08:09
- fredr
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Salut,
Le thème d'icones est humanity-colors-dark-blue et le gtk classic-ambiance-blue
Ce sont les thèmes de base de Ubuntu recolorisés.
Le ppa
sudo add-apt-repository ppa:ravefinity-project/ppa
sudo apt-get update
sudo apt-get install ambiance-colors radiance-colors humanity-colorsFredr
Dernière modification par fredr (Le 18/05/2012, à 15:41)
Fana du distro hopping, actuellement sur Ubuntu 24.04 ...
L'optimiste pense que nous vivons dans le meilleur des mondes. Et le pessimiste craint que ce ne soit exact.
Hors ligne
#257 Le 24/05/2012, à 03:02
- demobox
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
comment faites vous pour avoir ce type de widget
http://img838.imageshack.us/img838/8519 … 71680x.png
http://img12.imageshack.us/img12/4449/2 … 91680x.png
merci
Hors ligne
#258 Le 24/05/2012, à 09:26
- kleim
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
C'est le programme conky !
Dernière modification par kleim (Le 24/05/2012, à 09:27)
Asus G51VX , LDLC Vulcain SM1-1-H25, BeagleBoard-xM sous Arch Linux.
Un ordinateur sans Windows, c'est comme un gâteau au chocolat sans moutarde.
Hors ligne
#259 Le 03/06/2012, à 17:11
- syruss2009
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Voici mon bureau sous Xubuntu Voyager 12.10 LTS
Mon bureau vide:
Lorsqu'il est plein:
Dernière modification par syruss2009 (Le 03/06/2012, à 17:12)
Jeune linuxien gabonais
UBUNTU Lucid Lynx
Gateway LT20 Netbook/ Double cœur Intel® Atom™ processor N280-Intel® Atom™ processor N270 - 1 GB of DDR2 -160 GB hard disk drive
Hors ligne
#260 Le 19/06/2012, à 10:38
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Très beau
Tu peux me filer le lien du conky stp ? je le trouve magnifique 
Merci d'avance
A+
Hors ligne
#261 Le 19/06/2012, à 10:55
- syruss2009
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Leo 7 a écrit :
Très beau
Tu peux me filer le lien du conky stp ? je le trouve magnifiqueMerci d'avance
A+
Salut et merci, lequel des conky ? celui avec l'heure ou celui avec les indicateurs sur l'état de la consommation des ressources ou le conky pour la pochette de l'album lorsque Clémentine joue ?
Dernière modification par syruss2009 (Le 19/06/2012, à 10:57)
Jeune linuxien gabonais
UBUNTU Lucid Lynx
Gateway LT20 Netbook/ Double cœur Intel® Atom™ processor N280-Intel® Atom™ processor N270 - 1 GB of DDR2 -160 GB hard disk drive
Hors ligne
#262 Le 20/06/2012, à 12:36
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Celui avec les ressources système stp
Désolé j'avais pas vu que les autres étaient des conky je croyais que c'était des widgets.
A+
Hors ligne
#263 Le 20/06/2012, à 13:15
- syruss2009
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Ok !!! le voici :
Le code du conky. Tu devras le nommer conkyrc_3. Fait attention à la ligne 53 de ce code. Tu dois changer la localisation du fichier lua à la ligne 53 (lua_load ~/.conky/conky21/conky_3.lua)
#==============================================================================
# conkyrc_3
#
# author : CAYMUS
# version : v20120420-02
# license : Distributed under the terms of GNU GPL version 2 or later
#
#==============================================================================
background yes
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
temperature_unit celsius
double_buffer yes
no_buffers yes
text_buffer_size 2048
alignment top_middle
gap_x 10
gap_y 30
minimum_size 800 30
#maximum_width 190
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_argb_visual
own_window_argb_visual yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
alignment top_middle
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
override_utf8_locale yes
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5
uppercase no
default_color 666666
color1 888888
color2 AAAAAA
color3 DDDDDD
color4 CC3333
lua_load ~/.conky/conky21/conky_3.lua
lua_draw_hook_pre main_box
lua_draw_hook_post main_bars
TEXT
${voffset -5}
${goto 5}${font caviar dreams:size=12,weight:bold}${color}CPU
${voffset -45}
${goto 50}${font caviar dreams:size=7,weight:normal}${color}core 1:${goto 90}${cpu cpu1}%
${goto 50}${font caviar dreams:size=7,weight:normal}${color}core 2:${goto 90}${cpu cpu2}%
${voffset -49}
${goto 150}${font caviar dreams:size=12,weight:bold}${color}MEM
${voffset -43}
${goto 200}${font caviar dreams:size=7,weight:normal}${color}RAM ${goto 235}$mem
${goto 200}${font caviar dreams:size=7,weight:normal}${color}SWAP ${goto 235}$swap
${voffset -49}
${goto 315}${font caviar dreams:size=12,weight:bold}${color}DISKS
${voffset -43}
${goto 375}${font caviar dreams:size=7,weight:normal}${color}/home${goto 415}${fs_used /home}
${goto 375}${font caviar dreams:size=7,weight:normal}${color}/${goto 415}${fs_used /}
${voffset -49}
${goto 600}${font caviar dreams:size=12,weight:bold}${color}NET
${voffset -43}
${goto 650}${color1}${font caviar dreams:size=7,weight:bold}${if_existing /proc/net/route eth0}eth0 ${addr eth0}
${goto 650}${color}${font caviar dreams:size=7,weight:normal}Down: ${downspeed eth0}
${goto 650}${color}${font caviar dreams:size=7,weight:normal}Up: ${upspeed eth0}
${goto 650}${color1}${font caviar dreams:size=7,weight:bold}${else}${if_existing /proc/net/route wlan0}wifi ${addr wlan0}
${goto 650}${color}${font caviar dreams:size=7,weight:normal}AP: ${wireless_essid wlan0} ${goto 730}Speed: ${wireless_bitrate wlan0}
${goto 650}Mode: ${wireless_mode wlan0} ${goto 730}Quality: ${wireless_link_qual_perc wlan0}%Le fichier lua qui est aussi important. Tu devras le nommé conky_3.lua
--[[ BARGRAPH WIDGET
v2.1 by wlourf (07 Jan. 2011)
edited by Caymus
this widget draws a bargraph with different effects
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/bargraph.lua
lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, default = 0
skew_y - skew bar around y axis, default = 0
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=10 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.
Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, default = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour
reflection parameters, not avaimable for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
calues from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right
draw_me - if set to false, text is not drawn (default = true or 1)
it can be used with a conky string, if the string returns 1, the text is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
----------------START OF PARAMETERS ----------
function conky_main_bars()
local bars_settings={
{
name="cpu",
arg="cpu1",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=120,y=13,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="cpu",
arg="cpu2",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=120,y=23,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="memperc",
arg="",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=280,y=13,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="swapperc",
arg="",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=280,y=23,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="fs_used_perc",
arg="/home",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=460,y=13,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="fs_used_perc",
arg="/",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=460,y=23,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="downspeedf",
arg="eth0",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=95,y=450,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="upspeedf",
arg="eth0",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=95,y=460,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="downspeedf",
arg="wlan0",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=95,y=560,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
{
name="upspeedf",
arg="wlan0",
max=100,
alarm=80,
bg_colour={0x00ff00,0.25},
fg_colour={0x00ff00,1},
alarm_colour={0xff0000,1},
x=95,y=570,
blocks=5,
height=3,width=6,
angle=90,
smooth=true,
cap="e",
skew_y=15,
mid_colour={{0.5,0xffff00,1}}
},
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do
draw_multi_bar_graph(bars_settings[i])
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end
function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
local delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle
--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end
if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end
if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end
if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end
--end of default values
local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
--functions used to create patterns
local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end
local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end
local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat
if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end
local y1=-t.height*pct/100
local y2,y3
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end
if t.angle_bar==0 then
--block for fg value
local pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)
cairo_pattern_destroy(pat)
-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
cairo_pattern_destroy(pat)
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar
local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false
--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end
--set colors
--have to try to create gradients outside the loop ?
local pat
if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
end
else
if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end
local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
--$to_bytes doesn't work when value has a decimal point,
--https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
--http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
--conky bug?
--value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
--if string.match(value,"%w") then
-- value = conky_parse(string.format('${to_bytes %s}',value))
--end
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
pct = 100*value/t.max
pcb = 100/t.blocks
cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end
--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
tolua.takeownership(matrix1)
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end
cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
end --reflection
pct,pcb=nil
end --setup_bar_graph()
--start here !
setup_bar_graph()
cairo_restore(cr)
end
function conky_main_box()
if conky_window==nil then return end
---------------------- PARAMETERS BEGIN HERE
local boxes_settings={
{x=0,y=0,w=490,h=35, corners={ {"circle",10} },colour={ {0,0x1F1F1F,0.5} },operator="atop" } ,
{x=590,y=0,w=220,h=70, corners={ {"circle",10} },colour={ {0,0x1F1F1F,0.5} },operator="atop" } ,
}
---------------------------- PARAMETERS END HERE
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr=cairo_create(cs)
if tonumber(conky_parse("$updates"))<5 then return end
for i in pairs(boxes_settings) do
draw_box (cr,boxes_settings[i])
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
end
function draw_box(cr,t)
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
local table_corners={"circle","curve","line"}
local t_operators={
clear = CAIRO_OPERATOR_CLEAR,
source = CAIRO_OPERATOR_SOURCE,
over = CAIRO_OPERATOR_OVER,
["in"] = CAIRO_OPERATOR_IN,
out = CAIRO_OPERATOR_OUT,
atop = CAIRO_OPERATOR_ATOP,
dest = CAIRO_OPERATOR_DEST,
dest_over = CAIRO_OPERATOR_DEST_OVER,
dest_in = CAIRO_OPERATOR_DEST_IN,
dest_out = CAIRO_OPERATOR_DEST_OUT,
dest_atop = CAIRO_OPERATOR_DEST_ATOP,
xor = CAIRO_OPERATOR_XOR,
add = CAIRO_OPERATOR_ADD,
saturate = CAIRO_OPERATOR_SATURATE,
}
function rgba_to_r_g_b_a(tc)
--tc={position,colour,alpha}
local colour = tc[2]
local alpha = tc[3]
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function table.copy(t)
local t2 = {}
for k,v in pairs(t) do
t2[k] = {v[1],v[2]}
end
return t2
end
function draw_corner(num,t)
local shape=t[1]
local radius=t[2]
local x,y = t[3],t[4]
if shape=="line" then
if num == 1 then cairo_line_to(cr,radius,0)
elseif num == 2 then cairo_line_to(cr,x,radius)
elseif num == 3 then cairo_line_to(cr,x-radius,y)
elseif num == 4 then cairo_line_to(cr,0,y-radius)
end
end
if shape=="circle" then
local PI = math.pi
if num == 1 then cairo_arc(cr,radius,radius,radius,-PI,-PI/2)
elseif num == 2 then cairo_arc(cr,x-radius,y+radius,radius,-PI/2,0)
elseif num == 3 then cairo_arc(cr,x-radius,y-radius,radius,0,PI/2)
elseif num == 4 then cairo_arc(cr,radius,y-radius,radius,PI/2,-PI)
end
end
if shape=="curve" then
if num == 1 then cairo_curve_to(cr,0,radius ,0,0 ,radius,0)
elseif num == 2 then cairo_curve_to(cr,x-radius,0, x,y, x,radius)
elseif num == 3 then cairo_curve_to(cr,x,y-radius, x,y, x-radius,y)
elseif num == 4 then cairo_curve_to(cr,radius,y, x,y, 0,y-radius)
end
end
end
--check values and set default values
if t.x == nil then t.x = 0 end
if t.y == nil then t.y = 0 end
if t.w == nil then t.w = conky_window.width end
if t.h == nil then t.h = conky_window.height end
if t.radius == nil then t.radius = 0 end
if t.border == nil then t.border = 0 end
if t.colour==nil then t.colour={{1,0xFFFFFF,0.5}} end
if t.linear_gradient ~= nil then
if #t.linear_gradient ~= 4 then
t.linear_gradient = {t.x,t.y,t.width,t.height}
end
end
if t.angle==nil then t.angle = 0 end
if t.skew_x == nil then t.skew_x=0 end
if t.skew_y == nil then t.skew_y=0 end
if t.scale_x==nil then t.scale_x=1 end
if t.scale_y==nil then t.scale_y=1 end
if t.rot_x == nil then t.rot_x=0 end
if t.rot_y == nil then t.rot_y=0 end
if t.operator == nil then t.operator = "over" end
if (t_operators[t.operator]) == nil then
print ("wrong operator :",t.operator)
t.operator = "over"
end
if t.radial_gradient ~= nil then
if #t.radial_gradient ~= 6 then
t.radial_gradient = {t.x,t.y,0, t.x,t.y, t.width}
end
end
for i=1, #t.colour do
if #t.colour[i]~=3 then
print ("error in color table")
t.colour[i]={1,0xFFFFFF,1}
end
end
if t.corners == nil then t.corners={ {"line",0} } end
local t_corners = {}
local t_corners = table.copy(t.corners)
--don't use t_corners=t.corners otherwise t.corners is altered
--complete the t_corners table if needed
for i=#t_corners+1,4 do
t_corners[i]=t_corners[#t_corners]
local flag=false
for j,v in pairs(table_corners) do flag=flag or (t_corners[i][1]==v) end
if not flag then print ("error in corners table :",t_corners[i][1]);t_corners[i][1]="curve" end
end
--this way :
-- t_corners[1][4]=x
-- t_corners[2][3]=y
--doesn't work
t_corners[1]={t_corners[1][1],t_corners[1][2],0,0}
t_corners[2]={t_corners[2][1],t_corners[2][2],t.w,0}
t_corners[3]={t_corners[3][1],t_corners[3][2],t.w,t.h}
t_corners[4]={t_corners[4][1],t_corners[4][2],0,t.h}
t.no_gradient = (t.linear_gradient == nil ) and (t.radial_gradient == nil )
cairo_save(cr)
cairo_translate(cr, t.x, t.y)
if t.rot_x~=0 or t.rot_y~=0 or t.angle~=0 then
cairo_translate(cr,t.rot_x,t.rot_y)
cairo_rotate(cr,t.angle*math.pi/180)
cairo_translate(cr,-t.rot_x,-t.rot_y)
end
if t.scale_x~=1 or t.scale_y~=1 or t.skew_x~=0 or t.skew_y~=0 then
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_matrix_init (matrix0, t.scale_x,math.pi*t.skew_y/180 , math.pi*t.skew_x/180 ,t.scale_y,0,0)
cairo_transform(cr,matrix0)
end
local tc=t_corners
cairo_move_to(cr,tc[1][2],0)
cairo_line_to(cr,t.w-tc[2][2],0)
draw_corner(2,tc[2])
cairo_line_to(cr,t.w,t.h-tc[3][2])
draw_corner(3,tc[3])
cairo_line_to(cr,tc[4][2],t.h)
draw_corner(4,tc[4])
cairo_line_to(cr,0,tc[1][2])
draw_corner(1,tc[1])
if t.no_gradient then
cairo_set_source_rgba(cr,rgba_to_r_g_b_a(t.colour[1]))
else
if t.linear_gradient ~= nil then
pat = cairo_pattern_create_linear (t.linear_gradient[1],t.linear_gradient[2],t.linear_gradient[3],t.linear_gradient[4])
elseif t.radial_gradient ~= nil then
pat = cairo_pattern_create_radial (t.radial_gradient[1],t.radial_gradient[2],t.radial_gradient[3],
t.radial_gradient[4],t.radial_gradient[5],t.radial_gradient[6])
end
for i=1, #t.colour do
cairo_pattern_add_color_stop_rgba (pat, t.colour[i][1], rgba_to_r_g_b_a(t.colour[i]))
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
end
cairo_set_operator(cr,t_operators[t.operator])
if t.border>0 then
cairo_close_path(cr)
if t.dash ~= nil then cairo_set_dash(cr, t.dash, 1, 0.0) end
cairo_set_line_width(cr,t.border)
cairo_stroke(cr)
else
cairo_fill(cr)
end
cairo_restore(cr)
endJeune linuxien gabonais
UBUNTU Lucid Lynx
Gateway LT20 Netbook/ Double cœur Intel® Atom™ processor N280-Intel® Atom™ processor N270 - 1 GB of DDR2 -160 GB hard disk drive
Hors ligne
#264 Le 21/06/2012, à 12:48
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Merci !
Hors ligne
#265 Le 21/06/2012, à 13:07
- syruss2009
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Leo 7 a écrit :
Merci !
çà fonctionne ?
Jeune linuxien gabonais
UBUNTU Lucid Lynx
Gateway LT20 Netbook/ Double cœur Intel® Atom™ processor N280-Intel® Atom™ processor N270 - 1 GB of DDR2 -160 GB hard disk drive
Hors ligne
#266 Le 22/06/2012, à 09:51
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Pour le conky, j'ai pas encore testé
Je te dirais quand j'aurais tout configuré.
Sinon un ptit test de wmfs:
A+
Dernière modification par Leo 7 (Le 22/06/2012, à 17:47)
Hors ligne
#267 Le 25/06/2012, à 15:41
- ADcomp
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Hello, config actuelle , rien de transcendant ..
Openbox : gtk - elementary Dark, icon - elementary, adeskbar, trayer (systray , en bas, à droite)
Dernière modification par ADcomp (Le 25/06/2012, à 15:45)
David [aka] ADcomp
Hors ligne
#268 Le 25/06/2012, à 16:57
- MaatUNIX
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Du très très dark pour moi ce mois ci avec Openbox.
Ubuntu-fr: Une super communauté supportant le meilleure système d'exploitation jamais créé, avec ses supers admin à la con et leurs principes merdiques ! :D
http://lecitronvert.legtux.org/blog/?p=603
Hors ligne
#269 Le 27/06/2012, à 06:19
- camarade35
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
simple avec un dock non terminé.
EDIT :
Voilà quand c'est fini
Dernière modification par camarade35 (Le 28/06/2012, à 05:45)
AMD64 X2 3GHz, 2Go DDR2, Nvidia GeForce 9600GT (1Go DDR2)
Clavier étanche ^^ souris pas chère
Ubuntu Voyager
Hors ligne
#270 Le 27/06/2012, à 21:44
- syruss2009
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
camarade35 a écrit :
simple avec un dock non terminé.
j'ai reconnu Xunbuntu Voayage 
super !!!
Jeune linuxien gabonais
UBUNTU Lucid Lynx
Gateway LT20 Netbook/ Double cœur Intel® Atom™ processor N280-Intel® Atom™ processor N270 - 1 GB of DDR2 -160 GB hard disk drive
Hors ligne
#271 Le 27/06/2012, à 21:50
- winux12
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
là je tombe sur le topic, et je comprends pas, Unity c'est pas alternatif, et mon Gnome-shell non plus, bon je retourne sous Seven
La LIBERTE n'a pas de prix ... Dell E7270 - Core I7 - 16 Go Ram
TuxLibre - ARU2L
Adhérent à l'APRIL
1 Photo - 1 Jour Twitter
Hors ligne
#272 Le 27/06/2012, à 23:55
- cherrak
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
@ADcomp : J'adore les fenetres, j'adore le panel et le theme dark (au fait c'est Ambiance Dark ou autre chose?), j'adore aussi Bryan Lunduke et son fameux Linux Sucks, en fait j'adore tout ton environnement
#273 Le 29/06/2012, à 14:09
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
@MaatUNIX: Tès bel openbox.
Hors ligne
#274 Le 29/06/2012, à 22:57
- MaatUNIX
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Leo 7 a écrit :
@MaatUNIX: Tès bel openbox.
Merci à toi Leo7, c'était d'ailleurs mon dernier scrot sous OB, vive WMFS.
Ubuntu-fr: Une super communauté supportant le meilleure système d'exploitation jamais créé, avec ses supers admin à la con et leurs principes merdiques ! :D
http://lecitronvert.legtux.org/blog/?p=603
Hors ligne
#275 Le 30/06/2012, à 17:41
- Leo 7
Re : Un screen de votre "environnement alternatif" [images < 300*300 !]
Vive le tiling !
Hors ligne