Pages : 1
#1 Le 03/07/2012, à 11:01
- hmp
FAI sur ubuntu server 12.04
Bonjour,
depuis quelques jours, je m'échine à tenter l'installation de FAI (Fully Automated Installation) sur une ubuntu-server 12.04 up to date.
Est-ce que ces logs parlent à qqun ? Je vois bien les messages d'erreur, notamment ceux concernant insserv, mais ne sait pas comment les résoudre.
Voici les logs (make-fai-nfsroot.log) :
Creating FAI nfsroot in /srv/fai/nfsroot/live/filesystem.dir.
By default it needs more than 380 MBytes disk space.
This may take a long time.
Creating base system using debootstrap version 1.0.39ubuntu0.1
Calling debootstrap squeeze /srv/fai/nfsroot/live/filesystem.dir http://cdn.debian.net/debian
I: Retrieving Release
W: Cannot check Release signature; keyring file not available /usr/share/keyrings/debian-archive-keyring.gpg
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: insserv libbz2-1.0 libdb4.8 libslang2
I: Found additional base dependencies: libnfnetlink0 libsqlite3-0
I: Checking component main on http://cdn.debian.net/debian...
I: Validating libacl1
I: Validating adduser
I: Validating apt-utils
I: Validating apt
I: Validating aptitude
I: Validating libattr1
I: Validating base-files
I: Validating base-passwd
I: Validating bash
I: Validating libboost-iostreams1.42.0
I: Validating bsdmainutils
I: Validating libbz2-1.0
I: Retrieving coreutils
I: Validating coreutils
I: Retrieving cpio
I: Validating cpio
I: Retrieving cron
I: Validating cron
I: Retrieving libcwidget3
I: Validating libcwidget3
I: Retrieving dash
I: Validating dash
I: Retrieving libdb4.8
I: Validating libdb4.8
I: Retrieving debconf-i18n
I: Validating debconf-i18n
I: Retrieving debconf
I: Validating debconf
I: Retrieving debian-archive-keyring
I: Validating debian-archive-keyring
I: Retrieving debianutils
I: Validating debianutils
I: Retrieving diffutils
I: Validating diffutils
I: Retrieving dmidecode
I: Validating dmidecode
I: Retrieving dpkg
I: Validating dpkg
I: Retrieving e2fslibs
I: Validating e2fslibs
I: Retrieving e2fsprogs
I: Validating e2fsprogs
I: Retrieving libcomerr2
I: Validating libcomerr2
I: Retrieving libss2
I: Validating libss2
I: Retrieving libc-bin
I: Validating libc-bin
I: Retrieving libc6
I: Validating libc6
I: Retrieving findutils
I: Validating findutils
I: Retrieving gcc-4.4-base
I: Validating gcc-4.4-base
I: Retrieving libgcc1
I: Validating libgcc1
I: Retrieving libstdc++6
I: Validating libstdc++6
I: Retrieving libgdbm3
I: Validating libgdbm3
I: Retrieving gnupg
I: Validating gnupg
I: Retrieving gpgv
I: Validating gpgv
I: Retrieving grep
I: Validating grep
I: Retrieving groff-base
I: Validating groff-base
I: Retrieving gzip
I: Validating gzip
I: Retrieving hostname
I: Validating hostname
I: Retrieving ifupdown
I: Validating ifupdown
I: Retrieving insserv
I: Validating insserv
I: Retrieving iproute
I: Validating iproute
I: Retrieving iptables
I: Validating iptables
I: Retrieving iputils-ping
I: Validating iputils-ping
I: Retrieving isc-dhcp-client
I: Validating isc-dhcp-client
I: Retrieving isc-dhcp-common
I: Validating isc-dhcp-common
I: Retrieving logrotate
I: Validating logrotate
I: Retrieving lsb-base
I: Validating lsb-base
I: Retrieving libept1
I: Validating libept1
I: Retrieving liblocale-gettext-perl
I: Validating liblocale-gettext-perl
I: Retrieving libnfnetlink0
I: Validating libnfnetlink0
I: Retrieving libselinux1
I: Validating libselinux1
I: Retrieving libsepol1
I: Validating libsepol1
I: Retrieving libsigc++-2.0-0c2a
I: Validating libsigc++-2.0-0c2a
I: Retrieving libtext-charwidth-perl
I: Validating libtext-charwidth-perl
I: Retrieving libtext-iconv-perl
I: Validating libtext-iconv-perl
I: Retrieving libtext-wrapi18n-perl
I: Validating libtext-wrapi18n-perl
I: Retrieving libusb-0.1-4
I: Validating libusb-0.1-4
I: Retrieving man-db
I: Validating man-db
I: Retrieving manpages
I: Validating manpages
I: Retrieving mawk
I: Validating mawk
I: Retrieving module-init-tools
I: Validating module-init-tools
I: Retrieving nano
I: Validating nano
I: Retrieving libncurses5
I: Validating libncurses5
I: Retrieving libncursesw5
I: Validating libncursesw5
I: Retrieving ncurses-base
I: Validating ncurses-base
I: Retrieving ncurses-bin
I: Validating ncurses-bin
I: Retrieving net-tools
I: Validating net-tools
I: Retrieving netbase
I: Validating netbase
I: Retrieving netcat-traditional
I: Validating netcat-traditional
I: Retrieving libnewt0.52
I: Validating libnewt0.52
I: Retrieving whiptail
I: Validating whiptail
I: Retrieving libssl0.9.8
I: Validating libssl0.9.8
I: Retrieving libpam-modules
I: Validating libpam-modules
I: Retrieving libpam-runtime
I: Validating libpam-runtime
I: Retrieving libpam0g
I: Validating libpam0g
I: Retrieving perl-base
I: Validating perl-base
I: Retrieving libpopt0
I: Validating libpopt0
I: Retrieving procps
I: Validating procps
I: Retrieving libreadline6
I: Validating libreadline6
I: Retrieving readline-common
I: Validating readline-common
I: Retrieving rsyslog
I: Validating rsyslog
I: Retrieving sed
I: Validating sed
I: Retrieving sensible-utils
I: Validating sensible-utils
I: Retrieving login
I: Validating login
I: Retrieving passwd
I: Validating passwd
I: Retrieving libslang2
I: Validating libslang2
I: Retrieving libsqlite3-0
I: Validating libsqlite3-0
I: Retrieving initscripts
I: Validating initscripts
I: Retrieving sysv-rc
I: Validating sysv-rc
I: Retrieving sysvinit-utils
I: Validating sysvinit-utils
I: Retrieving sysvinit
I: Validating sysvinit
I: Retrieving tar
I: Validating tar
I: Retrieving tasksel-data
I: Validating tasksel-data
I: Retrieving tasksel
I: Validating tasksel
I: Retrieving install-info
I: Validating install-info
I: Retrieving traceroute
I: Validating traceroute
I: Retrieving tzdata
I: Validating tzdata
I: Retrieving libudev0
I: Validating libudev0
I: Retrieving udev
I: Validating udev
I: Retrieving bsdutils
I: Validating bsdutils
I: Retrieving libblkid1
I: Validating libblkid1
I: Retrieving libuuid1
I: Validating libuuid1
I: Retrieving mount
I: Validating mount
I: Retrieving util-linux
I: Validating util-linux
I: Retrieving vim-common
I: Validating vim-common
I: Retrieving vim-tiny
I: Validating vim-tiny
I: Retrieving wget
I: Validating wget
I: Retrieving libxapian22
I: Validating libxapian22
I: Retrieving liblzma2
I: Validating liblzma2
I: Retrieving xz-utils
I: Validating xz-utils
I: Retrieving zlib1g
I: Validating zlib1g
I: Chosen extractor for .deb packages: dpkg-deb
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting libbz2-1.0...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb4.8...
I: Extracting debconf-i18n...
I: Extracting debconf...
I: Extracting debianutils...
I: Extracting diffutils...
I: Extracting dpkg...
I: Extracting e2fslibs...
I: Extracting e2fsprogs...
I: Extracting libcomerr2...
I: Extracting libss2...
I: Extracting libc-bin...
I: Extracting libc6...
I: Extracting findutils...
I: Extracting gcc-4.4-base...
I: Extracting libgcc1...
I: Extracting libstdc++6...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting insserv...
I: Extracting lsb-base...
I: Extracting liblocale-gettext-perl...
I: Extracting libselinux1...
I: Extracting libsepol1...
I: Extracting libtext-charwidth-perl...
I: Extracting libtext-iconv-perl...
I: Extracting libtext-wrapi18n-perl...
I: Extracting mawk...
I: Extracting libncurses5...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting libpam-modules...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting perl-base...
I: Extracting sed...
I: Extracting sensible-utils...
I: Extracting login...
I: Extracting passwd...
I: Extracting libslang2...
I: Extracting initscripts...
I: Extracting sysv-rc...
I: Extracting sysvinit-utils...
I: Extracting sysvinit...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting bsdutils...
I: Extracting libblkid1...
I: Extracting libuuid1...
I: Extracting mount...
I: Extracting util-linux...
I: Extracting liblzma2...
I: Extracting xz-utils...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking libacl1...
I: Unpacking libattr1...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking libbz2-1.0...
I: Unpacking coreutils...
I: Unpacking dash...
I: Unpacking libdb4.8...
I: Unpacking debconf-i18n...
I: Unpacking debconf...
I: Unpacking debianutils...
I: Unpacking diffutils...
I: Unpacking dpkg...
I: Unpacking e2fslibs...
I: Unpacking e2fsprogs...
I: Unpacking libcomerr2...
I: Unpacking libss2...
I: Unpacking libc-bin...
I: Unpacking libc6...
I: Unpacking findutils...
I: Unpacking gcc-4.4-base...
I: Unpacking libgcc1...
I: Unpacking libstdc++6...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking insserv...
I: Unpacking lsb-base...
I: Unpacking liblocale-gettext-perl...
I: Unpacking libselinux1...
I: Unpacking libsepol1...
I: Unpacking libtext-charwidth-perl...
I: Unpacking libtext-iconv-perl...
I: Unpacking libtext-wrapi18n-perl...
I: Unpacking mawk...
I: Unpacking libncurses5...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking libpam-modules...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking sensible-utils...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking libslang2...
I: Unpacking initscripts...
I: Unpacking sysv-rc...
I: Unpacking sysvinit-utils...
I: Unpacking sysvinit...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking bsdutils...
I: Unpacking libblkid1...
I: Unpacking libuuid1...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking liblzma2...
I: Unpacking xz-utils...
I: Unpacking zlib1g...
I: Configuring required packages...
I: Configuring ncurses-base...
I: Configuring sensible-utils...
I: Configuring libc-bin...
I: Configuring gcc-4.4-base...
I: Configuring libc6...
I: Configuring debianutils...
I: Configuring bsdutils...
I: Configuring libsepol1...
I: Configuring diffutils...
I: Configuring tar...
I: Configuring zlib1g...
I: Configuring libgcc1...
I: Configuring libncurses5...
I: Configuring libattr1...
I: Configuring e2fslibs...
I: Configuring base-passwd...
I: Configuring libcomerr2...
I: Configuring mawk...
I: Configuring libdb4.8...
I: Configuring hostname...
I: Configuring libacl1...
I: Configuring libslang2...
I: Configuring libss2...
I: Configuring liblzma2...
I: Configuring insserv...
I: Configuring gzip...
I: Configuring libbz2-1.0...
I: Configuring libselinux1...
I: Configuring libstdc++6...
I: Configuring coreutils...
I: Configuring ncurses-bin...
I: Configuring base-files...
I: Configuring xz-utils...
I: Configuring dpkg...
I: Configuring sysvinit-utils...
I: Configuring dash...
I: Configuring perl-base...
I: Configuring libtext-iconv-perl...
I: Configuring sed...
I: Configuring grep...
I: Configuring findutils...
I: Configuring liblocale-gettext-perl...
I: Configuring bash...
I: Configuring libtext-charwidth-perl...
I: Configuring libtext-wrapi18n-perl...
I: Configuring lsb-base...
I: Configuring debconf-i18n...
I: Configuring debconf...
I: Configuring libpam0g...
I: Configuring sysv-rc...
I: Configuring libpam-modules...
I: Configuring tzdata...
I: Configuring passwd...
I: Configuring libpam-runtime...
I: Configuring login...
I: Configuring libuuid1...
I: Configuring libblkid1...
I: Configuring mount...
I: Configuring initscripts...
I: Configuring util-linux...
I: Configuring sysvinit...
I: Configuring e2fsprogs...
I: Unpacking the base system...
I: Unpacking adduser...
I: Unpacking apt-utils...
I: Unpacking apt...
I: Unpacking aptitude...
I: Unpacking libboost-iostreams1.42.0...
I: Unpacking bsdmainutils...
I: Unpacking cpio...
I: Unpacking cron...
I: Unpacking libcwidget3...
I: Unpacking debian-archive-keyring...
I: Unpacking dmidecode...
I: Unpacking libgdbm3...
I: Unpacking gnupg...
I: Unpacking gpgv...
I: Unpacking groff-base...
I: Unpacking ifupdown...
I: Unpacking iproute...
I: Unpacking iptables...
I: Unpacking iputils-ping...
I: Unpacking isc-dhcp-client...
I: Unpacking isc-dhcp-common...
I: Unpacking logrotate...
I: Unpacking libept1...
I: Unpacking libnfnetlink0...
I: Unpacking libsigc++-2.0-0c2a...
I: Unpacking libusb-0.1-4...
I: Unpacking man-db...
I: Unpacking manpages...
I: Unpacking module-init-tools...
I: Unpacking nano...
I: Unpacking libncursesw5...
I: Unpacking net-tools...
I: Unpacking netbase...
I: Unpacking netcat-traditional...
I: Unpacking libnewt0.52...
I: Unpacking whiptail...
I: Unpacking libssl0.9.8...
I: Unpacking libpopt0...
I: Unpacking procps...
I: Unpacking libreadline6...
I: Unpacking readline-common...
I: Unpacking rsyslog...
I: Unpacking libsqlite3-0...
I: Unpacking tasksel-data...
I: Unpacking tasksel...
I: Unpacking install-info...
I: Unpacking traceroute...
I: Unpacking libudev0...
I: Unpacking udev...
I: Unpacking vim-common...
I: Unpacking vim-tiny...
I: Unpacking wget...
I: Unpacking libxapian22...
I: Configuring the base system...
I: Configuring module-init-tools...
I: Configuring libgdbm3...
I: Configuring isc-dhcp-common...
I: Configuring libpopt0...
I: Configuring libusb-0.1-4...
I: Configuring libxapian22...
I: Configuring install-info...
I: Configuring libssl0.9.8...
I: Configuring vim-common...
I: Configuring netbase...
I: Configuring dmidecode...
I: Configuring libudev0...
I: Configuring adduser...
I: Configuring traceroute...
I: Configuring manpages...
I: Configuring libsqlite3-0...
I: Configuring iproute...
I: Configuring wget...
I: Configuring groff-base...
I: Configuring libnewt0.52...
I: Configuring net-tools...
I: Configuring bsdmainutils...
I: Configuring libsigc++-2.0-0c2a...
I: Configuring netcat-traditional...
I: Configuring libncursesw5...
I: Configuring iputils-ping...
I: Configuring cron...
I: Configuring nano...
I: Configuring udev...
I: Configuring libboost-iostreams1.42.0...
I: Configuring rsyslog...
I: Configuring cpio...
I: Configuring isc-dhcp-client...
I: Configuring vim-tiny...
I: Configuring readline-common...
I: Configuring libnfnetlink0...
I: Configuring man-db...
I: Configuring procps...
I: Configuring whiptail...
I: Configuring ifupdown...
I: Configuring libreadline6...
I: Configuring logrotate...
I: Configuring libcwidget3...
I: Configuring iptables...
I: Configuring gpgv...
I: Configuring gnupg...
I: Configuring debian-archive-keyring...
I: Configuring apt...
I: Configuring libept1...
I: Configuring apt-utils...
I: Configuring aptitude...
I: Configuring tasksel-data...
I: Configuring tasksel...
I: Base system installed successfully.
Creating base.tgz
Upgrading /srv/fai/nfsroot/live/filesystem.dir
`/etc/resolv.conf' -> `/srv/fai/nfsroot/live/filesystem.dir/etc/resolv.conf-installserver'
`/etc/resolv.conf' -> `/srv/fai/nfsroot/live/filesystem.dir/etc/resolv.conf'
Get:1 http://archive.ubuntu.com precise Release.gpg [198 B]
Get:2 http://archive.ubuntu.com/ubuntu/ precise/main Translation-en [893 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ precise/multiverse Translation-en [112 kB]
Get:4 http://archive.ubuntu.com/ubuntu/ precise/restricted Translation-en [2018 B]
Get:5 http://archive.ubuntu.com/ubuntu/ precise/universe Translation-en [4133 kB]
Get:6 http://archive.ubuntu.com precise-security Release.gpg [198 B]
Get:7 http://archive.ubuntu.com/ubuntu/ precise-security/main Translation-en [41.3 kB]
Get:8 http://archive.ubuntu.com/ubuntu/ precise-security/multiverse Translation-en [515 B]
Get:9 http://archive.ubuntu.com/ubuntu/ precise-security/restricted Translation-en [20 B]
Get:10 http://archive.ubuntu.com/ubuntu/ precise-security/universe Translation-en [12.6 kB]
Get:11 http://archive.ubuntu.com precise-updates Release.gpg [198 B]
Get:12 http://archive.ubuntu.com/ubuntu/ precise-updates/main Translation-en [182 kB]
Get:13 http://archive.ubuntu.com/ubuntu/ precise-updates/multiverse Translation-en [826 B]
Get:14 http://archive.ubuntu.com/ubuntu/ precise-updates/restricted Translation-en [725 B]
Get:15 http://archive.ubuntu.com/ubuntu/ precise-updates/universe Translation-en [58.7 kB]
Get:16 http://archive.ubuntu.com precise Release [49.6 kB]
Get:17 http://archive.ubuntu.com precise-security Release [49.6 kB]
Get:18 http://archive.ubuntu.com precise-updates Release [49.6 kB]
Get:19 http://archive.ubuntu.com precise/main amd64 Packages [1640 kB]
Get:20 http://archive.ubuntu.com precise/restricted amd64 Packages [9098 B]
Get:21 http://archive.ubuntu.com precise/universe amd64 Packages [6167 kB]
Get:22 http://archive.ubuntu.com precise/multiverse amd64 Packages [152 kB]
Get:23 http://archive.ubuntu.com precise-security/main amd64 Packages [84.3 kB]
Get:24 http://archive.ubuntu.com precise-security/restricted amd64 Packages [20 B]
Get:25 http://archive.ubuntu.com precise-security/universe amd64 Packages [21.0 kB]
Get:26 http://archive.ubuntu.com precise-security/multiverse amd64 Packages [1074 B]
Get:27 http://archive.ubuntu.com precise-updates/main amd64 Packages [397 kB]
Get:28 http://archive.ubuntu.com precise-updates/restricted amd64 Packages [2656 B]
Get:29 http://archive.ubuntu.com precise-updates/universe amd64 Packages [107 kB]
Get:30 http://archive.ubuntu.com precise-updates/multiverse amd64 Packages [1671 B]
Fetched 14.2 MB in 2min 16s (103 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Initializing package states...
Writing extended state information...
Reading task descriptions...
The following NEW packages will be installed:
busybox{a} busybox-initramfs{a} dmsetup{a} fai-client{a} fai-nfsroot
fai-setup-storage{a} file{a} gcc-4.6-base{a} initramfs-tools{a}
initramfs-tools-bin{a} klibc-utils{a} libapt-pkg-perl{a}
libapt-pkg4.12{a} libclass-isa-perl{a} libdb5.1{a} libdevmapper1.02.1{a}
libklibc{a} liblinux-lvm-perl{a} libmagic1{a} libparse-recdescent-perl{a}
libparted0debian1{a} libswitch-perl{a} libtinfo5{a} live-boot{a}
live-boot-initramfs-tools{a} multiarch-support{a} parted{a} perl{a}
perl-modules{a}
The following packages will be upgraded:
libc-bin libc6 libstdc++6 perl-base
4 packages upgraded, 29 newly installed, 0 to remove and 105 not upgraded.
Need to get 19.1 MB of archives. After unpacking 47.5 MB will be used.
The following packages have unmet dependencies:
libtext-charwidth-perl: Depends: perlapi-5.10.0 which is a virtual package.
liblocale-gettext-perl: PreDepends: perlapi-5.10.0 which is a virtual package.
libtext-iconv-perl: Depends: perlapi-5.10.0 which is a virtual package.
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) fai-client [Not Installed]
2) fai-nfsroot [Not Installed]
3) fai-setup-storage [Not Installed]
4) libapt-pkg-perl [Not Installed]
5) liblinux-lvm-perl [Not Installed]
6) libparse-recdescent-perl [Not Installed]
7) libswitch-perl [Not Installed]
8) perl [Not Installed]
9) perl-base [5.10.1-17squeeze3 (now)]
10) perl-modules [Not Installed]
The following NEW packages will be installed:
gcc-4.6-base{a} multiarch-support{a}
The following packages will be upgraded:
libc-bin libc6 libstdc++6
3 packages upgraded, 2 newly installed, 0 to remove and 106 not upgraded.
Need to get 6178 kB of archives. After unpacking 2792 kB will be used.
Writing extended state information...
Get:1 http://archive.ubuntu.com/ubuntu/ precise/main libc-bin amd64 2.15-0ubuntu10 [1180 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ precise/main libc6 amd64 2.15-0ubuntu10 [4658 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ precise/main gcc-4.6-base amd64 4.6.3-1ubuntu5 [15.3 kB]
Get:4 http://archive.ubuntu.com/ubuntu/ precise/main multiarch-support amd64 2.15-0ubuntu10 [4476 B]
Get:5 http://archive.ubuntu.com/ubuntu/ precise/main libstdc++6 amd64 4.6.3-1ubuntu5 [320 kB]
Preconfiguring packages ...
Fetched 6178 kB in 56s (110 kB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8487 files and directories currently installed.)
Preparing to replace libc-bin 2.11.3-3 (using .../libc-bin_2.15-0ubuntu10_amd64.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
locale: /lib/libc.so.6: version `GLIBC_2.15' not found (required by locale)
locale: /lib/libc.so.6: version `GLIBC_2.14' not found (required by locale)
Setting up libc-bin (2.15-0ubuntu10) ...
Installing new version of config file /etc/bindresvport.blacklist ...
Installing new version of config file /etc/gai.conf ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8506 files and directories currently installed.)
Preparing to replace libc6 2.11.3-3 (using .../libc6_2.15-0ubuntu10_amd64.deb) ...
locale: /lib/libc.so.6: version `GLIBC_2.15' not found (required by locale)
locale: /lib/libc.so.6: version `GLIBC_2.14' not found (required by locale)
Checking for services that may need to be restarted...
Checking init scripts...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
Unpacking replacement libc6 ...
Setting up libc6 (2.15-0ubuntu10) ...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Selecting previously deselected package gcc-4.6-base.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8515 files and directories currently installed.)
Unpacking gcc-4.6-base (from .../gcc-4.6-base_4.6.3-1ubuntu5_amd64.deb) ...
Setting up gcc-4.6-base (4.6.3-1ubuntu5) ...
Selecting previously deselected package multiarch-support.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8523 files and directories currently installed.)
Unpacking multiarch-support (from .../multiarch-support_2.15-0ubuntu10_amd64.deb) ...
Setting up multiarch-support (2.15-0ubuntu10) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8526 files and directories currently installed.)
Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.6.3-1ubuntu5_amd64.deb) ...
Unpacking replacement libstdc++6 ...
Setting up libstdc++6 (4.6.3-1ubuntu5) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Reading task descriptions...
Reading package lists...
Building dependency tree...
Reading state information...
Get:1 http://archive.ubuntu.com precise Release.gpg [198 B]
Hit http://archive.ubuntu.com/ubuntu/ precise/main Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise/multiverse Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise/restricted Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise/universe Translation-en
Get:2 http://archive.ubuntu.com precise-security Release.gpg [198 B]
Hit http://archive.ubuntu.com/ubuntu/ precise-security/main Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-security/multiverse Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-security/restricted Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-security/universe Translation-en
Get:3 http://archive.ubuntu.com precise-updates Release.gpg [198 B]
Hit http://archive.ubuntu.com/ubuntu/ precise-updates/main Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-updates/multiverse Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-updates/restricted Translation-en
Hit http://archive.ubuntu.com/ubuntu/ precise-updates/universe Translation-en
Get:4 http://archive.ubuntu.com precise Release [49.6 kB]
Get:5 http://archive.ubuntu.com precise-security Release [49.6 kB]
Get:6 http://archive.ubuntu.com precise-updates Release [49.6 kB]
Hit http://archive.ubuntu.com precise/main amd64 Packages
Hit http://archive.ubuntu.com precise/restricted amd64 Packages
Hit http://archive.ubuntu.com precise/universe amd64 Packages
Hit http://archive.ubuntu.com precise/multiverse amd64 Packages
Hit http://archive.ubuntu.com precise-security/main amd64 Packages
Hit http://archive.ubuntu.com precise-security/restricted amd64 Packages
Hit http://archive.ubuntu.com precise-security/universe amd64 Packages
Hit http://archive.ubuntu.com precise-security/multiverse amd64 Packages
Hit http://archive.ubuntu.com precise-updates/main amd64 Packages
Hit http://archive.ubuntu.com precise-updates/restricted amd64 Packages
Hit http://archive.ubuntu.com precise-updates/universe amd64 Packages
Hit http://archive.ubuntu.com precise-updates/multiverse amd64 Packages
Fetched 149 kB in 1s (99.8 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following packages have unmet dependencies:
base-files : Breaks: initscripts (< 2.88dsf-13.3) but 2.88dsf-13.1+squeeze1 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
Adding additional packages to /srv/fai/nfsroot/live/filesystem.dir:
nfs-common fai-nfsroot module-init-tools ssh rdate lshw portmap rsync lftp less dump reiserfsprogs e2fsprogs usbutils hwinfo psmisc pciutils hdparm smartmontools parted mdadm lvm2 dnsutils ntpdate dosfstools jove xfsprogs xfsdump procinfo dialog discover console-setup console-common iproute udev subversion liblinux-lvm-perl cfengine2 libapt-pkg-perl grub-pc lilo linux-image-server-amd64
install_packages: reading config files from directory /etc/fai
install_packages: read config file NFSROOT
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir apt-get clean
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir aptitude -R -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install nfs-common fai-nfsroot module-init-tools ssh rdate lshw portmap rsync lftp less dump reiserfsprogs e2fsprogs usbutils hwinfo psmisc pciutils hdparm smartmontools parted mdadm lvm2 dnsutils ntpdate dosfstools jove xfsprogs xfsdump procinfo dialog discover console-setup console-common iproute udev subversion liblinux-lvm-perl cfengine2 libapt-pkg-perl grub-pc lilo linux-image-server-amd64
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Reading task descriptions...
Note: selecting "rpcbind" instead of the
virtual package "portmap"
Couldn't find any package whose name or description matched "linux-image-server-amd64"
Couldn't find any package whose name or description matched "linux-image-server-amd64"
The following NEW packages will be installed:
bind9-host{a} busybox-initramfs{a} cfengine2 console-common
console-data{a} console-setup dialog discover discover-data{a} dmsetup{a}
dnsutils dosfstools dump fai-client{a} fai-nfsroot fai-setup-storage{a}
file{a} gettext-base{a} grub-common{a} grub-gfxpayload-lists{a} grub-pc
grub-pc-bin{a} grub2-common{a} hdparm hwinfo initramfs-tools{a}
initramfs-tools-bin{a} jove kbd{a} keyboard-configuration{a}
klibc-utils{a} less lftp libapr1{a} libaprutil1{a} libapt-pkg-perl
libapt-pkg4.12{a} libasn1-8-heimdal{a} libbind9-80{a} libbsd0{a}
libcap-ng0{a} libcap2{a} libclass-isa-perl{a} libdb5.1{a} libdbus-1-3{a}
libdevmapper-event1.02.1{a} libdevmapper1.02.1{a} libdiscover2{a}
libdns81{a} libdrm-intel1{a} libdrm-nouveau1a{a} libdrm-radeon1{a}
libdrm2{a} libedit2{a} libevent-2.0-5{a} libexpat1{a} libffi6{a}
libfreetype6{a} libfuse2{a} libgcrypt11{a} libgeoip1{a} libglib2.0-0{a}
libgnutls26{a} libgpg-error0{a} libgssapi-krb5-2{a} libgssapi3-heimdal{a}
libgssglue1{a} libhal1{a} libhcrypto4-heimdal{a} libhd16{a}
libheimbase1-heimdal{a} libheimntlm0-heimdal{a} libhx509-5-heimdal{a}
libisc83{a} libisccc80{a} libisccfg82{a} libk5crypto3{a} libkeyutils1{a}
libklibc{a} libkrb5-26-heimdal{a} libkrb5-3{a} libkrb5support0{a}
libldap-2.4-2{a} liblinux-lvm-perl liblwres80{a} libmagic1{a}
libneon27-gnutls{a} libnfsidmap2{a} libnih-dbus1{a} libnih1{a}
libp11-kit0{a} libparse-recdescent-perl{a} libparted0debian1{a}
libpci3{a} libpciaccess0{a} libpcre3{a} libplymouth2{a} libpng12-0{a}
libreadline5{a} libroken18-heimdal{a} libsasl2-2{a} libssl1.0.0{a}
libsvn1{a} libswitch-perl{a} libtasn1-3{a} libtinfo5{a} libtirpc1{a}
libusb-1.0-0{a} libwind0-heimdal{a} libwrap0{a} libxml2{a} lilo
live-boot{a} live-boot-initramfs-tools{a} lshw lvm2 makedev{a} mdadm
mountall{a} nfs-common ntpdate openssh-client{a} openssh-server{a} parted
pciutils perl{a} perl-modules{a} plymouth{a} procinfo psmisc rdate
reiserfsprogs rpcbind rsync smartmontools ssh subversion ucf{a}
upstart{ab} usbutils watershed{a} xfsdump xfsprogs xkb-data{a}
The following packages will be upgraded:
debianutils e2fslibs e2fsprogs ifupdown initscripts insserv iproute
libacl1 libcomerr2 libudev0 module-init-tools perl-base udev
13 packages upgraded, 144 newly installed, 0 to remove and 93 not upgraded.
Need to get 44.4 MB of archives. After unpacking 129 MB will be used.
The following packages have unmet dependencies:
libtext-charwidth-perl: Depends: perlapi-5.10.0 which is a virtual package.
liblocale-gettext-perl: PreDepends: perlapi-5.10.0 which is a virtual package.
libtext-iconv-perl: Depends: perlapi-5.10.0 which is a virtual package.
upstart: Conflicts: sysvinit but 2.88dsf-13.1+squeeze1 is installed.
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) console-common [Not Installed]
2) console-setup [Not Installed]
3) fai-client [Not Installed]
4) fai-nfsroot [Not Installed]
5) fai-setup-storage [Not Installed]
6) ifupdown [0.6.10 (now)]
7) initscripts [2.88dsf-13.1+squeeze1 (now)]
8) kbd [Not Installed]
9) keyboard-configuration [Not Installed]
10) libapt-pkg-perl [Not Installed]
11) liblinux-lvm-perl [Not Installed]
12) libparse-recdescent-perl [Not Installed]
13) libswitch-perl [Not Installed]
14) libudev0 [164-3 (now)]
15) lilo [Not Installed]
16) mdadm [Not Installed]
17) module-init-tools [3.12-2 (now)]
18) mountall [Not Installed]
19) nfs-common [Not Installed]
20) openssh-server [Not Installed]
21) perl [Not Installed]
22) perl-base [5.10.1-17squeeze3 (now)]
23) perl-modules [Not Installed]
24) plymouth [Not Installed]
25) rpcbind [Not Installed]
26) ssh [Not Installed]
27) udev [164-3 (now)]
28) upstart [Not Installed]
The following packages have been kept back:
module-init-tools udev
The following NEW packages will be installed:
bind9-host{a} busybox-initramfs{a} cfengine2 dialog discover
discover-data{a} dmsetup{a} dnsutils dosfstools dump gettext-base{a}
grub-common{a} grub-gfxpayload-lists{a} grub-pc grub-pc-bin{a}
grub2-common{a} hdparm hwinfo initramfs-tools{a} initramfs-tools-bin{a}
jove klibc-utils{a} less lftp libapr1{a} libaprutil1{a}
libasn1-8-heimdal{a} libbind9-80{a} libbsd0{a} libcap-ng0{a} libdb5.1{a}
libdbus-1-3{a} libdevmapper-event1.02.1{a} libdevmapper1.02.1{a}
libdiscover2{a} libdns81{a} libexpat1{a} libfreetype6{a} libfuse2{a}
libgcrypt11{a} libgeoip1{a} libgnutls26{a} libgpg-error0{a}
libgssapi-krb5-2{a} libgssapi3-heimdal{a} libhal1{a}
libhcrypto4-heimdal{a} libhd16{a} libheimbase1-heimdal{a}
libheimntlm0-heimdal{a} libhx509-5-heimdal{a} libisc83{a} libisccc80{a}
libisccfg82{a} libk5crypto3{a} libkeyutils1{a} libklibc{a}
libkrb5-26-heimdal{a} libkrb5-3{a} libkrb5support0{a} libldap-2.4-2{a}
liblwres80{a} libneon27-gnutls{a} libp11-kit0{a} libparted0debian1{a}
libpci3{a} libpng12-0{a} libreadline5{a} libroken18-heimdal{a}
libsasl2-2{a} libssl1.0.0{a} libsvn1{a} libtasn1-3{a} libtinfo5{a}
libusb-1.0-0{a} libwind0-heimdal{a} libxml2{a} lshw lvm2 ntpdate parted
pciutils procinfo psmisc rdate reiserfsprogs rsync smartmontools
subversion ucf{a} usbutils watershed{a} xfsdump xfsprogs
The following packages will be upgraded:
debianutils e2fslibs e2fsprogs insserv iproute libacl1 libcomerr2
7 packages upgraded, 94 newly installed, 0 to remove and 99 not upgraded.
Need to get 24.5 MB of archives. After unpacking 64.7 MB will be used.
Writing extended state information...
Get:1 http://archive.ubuntu.com/ubuntu/ precise/main debianutils amd64 4.2.1ubuntu2 [65.2 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ precise/main libcomerr2 amd64 1.42-1ubuntu2 [57.2 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ precise/main e2fslibs amd64 1.42-1ubuntu2 [187 kB]
Get:4 http://archive.ubuntu.com/ubuntu/ precise/main e2fsprogs amd64 1.42-1ubuntu2 [966 kB]
Get:5 http://archive.ubuntu.com/ubuntu/ precise/main libacl1 amd64 2.2.51-5ubuntu1 [17.8 kB]
Get:6 http://archive.ubuntu.com/ubuntu/ precise/main libexpat1 amd64 2.0.1-7.2ubuntu1 [131 kB]
Get:7 http://archive.ubuntu.com/ubuntu/ precise-security/main libssl1.0.0 amd64 1.0.1-4ubuntu5.2 [1011 kB]
Get:8 http://archive.ubuntu.com/ubuntu/ precise-updates/main ntpdate amd64 1:4.2.6.p3+dfsg-1ubuntu3.1 [65.1 kB]
Get:9 http://archive.ubuntu.com/ubuntu/ precise/main libdb5.1 amd64 5.1.25-11build1 [700 kB]
Get:10 http://archive.ubuntu.com/ubuntu/ precise/main libdbus-1-3 amd64 1.4.18-1ubuntu1 [144 kB]
Get:11 http://archive.ubuntu.com/ubuntu/ precise/main libpng12-0 amd64 1.2.46-3ubuntu4 [132 kB]
Get:12 http://archive.ubuntu.com/ubuntu/ precise/main libtinfo5 amd64 5.9-4 [95.3 kB]
Get:13 http://archive.ubuntu.com/ubuntu/ precise/main libroken18-heimdal amd64 1.6~git20120311.dfsg.1-2 [46.0 kB]
Get:14 http://archive.ubuntu.com/ubuntu/ precise/main libasn1-8-heimdal amd64 1.6~git20120311.dfsg.1-2 [220 kB]
Get:15 http://archive.ubuntu.com/ubuntu/ precise/main libbsd0 amd64 0.3.0-2 [31.6 kB]
Get:16 http://archive.ubuntu.com/ubuntu/ precise/main libgpg-error0 amd64 1.10-2ubuntu1 [14.5 kB]
Get:17 http://archive.ubuntu.com/ubuntu/ precise-updates/main libgcrypt11 amd64 1.5.0-3ubuntu0.1 [280 kB]
Get:18 http://archive.ubuntu.com/ubuntu/ precise/main libp11-kit0 amd64 0.12-2ubuntu1 [34.3 kB]
Get:19 http://archive.ubuntu.com/ubuntu/ precise-security/main libtasn1-3 amd64 2.10-1ubuntu1.1 [43.3 kB]
Get:20 http://archive.ubuntu.com/ubuntu/ precise/main libgnutls26 amd64 2.12.14-5ubuntu3 [459 kB]
Get:21 http://archive.ubuntu.com/ubuntu/ precise-updates/main libkrb5support0 amd64 1.10+dfsg~beta1-2ubuntu0.1 [23.4 kB]
Get:22 http://archive.ubuntu.com/ubuntu/ precise-updates/main libk5crypto3 amd64 1.10+dfsg~beta1-2ubuntu0.1 [79.9 kB]
Get:23 http://archive.ubuntu.com/ubuntu/ precise/main libkeyutils1 amd64 1.5.2-2 [7862 B]
Get:24 http://archive.ubuntu.com/ubuntu/ precise-updates/main libkrb5-3 amd64 1.10+dfsg~beta1-2ubuntu0.1 [354 kB]
Get:25 http://archive.ubuntu.com/ubuntu/ precise-updates/main libgssapi-krb5-2 amd64 1.10+dfsg~beta1-2ubuntu0.1 [118 kB]
Get:26 http://archive.ubuntu.com/ubuntu/ precise/main libhcrypto4-heimdal amd64 1.6~git20120311.dfsg.1-2 [103 kB]
Get:27 http://archive.ubuntu.com/ubuntu/ precise/main libheimbase1-heimdal amd64 1.6~git20120311.dfsg.1-2 [33.0 kB]
Get:28 http://archive.ubuntu.com/ubuntu/ precise/main libwind0-heimdal amd64 1.6~git20120311.dfsg.1-2 [77.8 kB]
Get:29 http://archive.ubuntu.com/ubuntu/ precise/main libhx509-5-heimdal amd64 1.6~git20120311.dfsg.1-2 [125 kB]
Get:30 http://archive.ubuntu.com/ubuntu/ precise/main libkrb5-26-heimdal amd64 1.6~git20120311.dfsg.1-2 [234 kB]
Get:31 http://archive.ubuntu.com/ubuntu/ precise/main libheimntlm0-heimdal amd64 1.6~git20120311.dfsg.1-2 [16.0 kB]
Get:32 http://archive.ubuntu.com/ubuntu/ precise/main libgssapi3-heimdal amd64 1.6~git20120311.dfsg.1-2 [108 kB]
Get:33 http://archive.ubuntu.com/ubuntu/ precise-updates/main libsasl2-2 amd64 2.1.25.dfsg1-3ubuntu0.1 [69.1 kB]
Get:34 http://archive.ubuntu.com/ubuntu/ precise/main libldap-2.4-2 amd64 2.4.28-1.1ubuntu4 [186 kB]
Get:35 http://archive.ubuntu.com/ubuntu/ precise/main initramfs-tools-bin amd64 0.99ubuntu13 [9988 B]
Get:36 http://archive.ubuntu.com/ubuntu/ precise/main libklibc amd64 1.5.25-1ubuntu2 [45.7 kB]
Get:37 http://archive.ubuntu.com/ubuntu/ precise/main klibc-utils amd64 1.5.25-1ubuntu2 [181 kB]
Get:38 http://archive.ubuntu.com/ubuntu/ precise/main busybox-initramfs amd64 1:1.18.5-1ubuntu4 [184 kB]
Get:39 http://archive.ubuntu.com/ubuntu/ precise/main initramfs-tools all 0.99ubuntu13 [49.2 kB]
Get:40 http://archive.ubuntu.com/ubuntu/ precise-updates/main dmsetup amd64 2:1.02.48-4ubuntu7.1 [37.2 kB]
Get:41 http://archive.ubuntu.com/ubuntu/ precise-updates/main libdevmapper1.02.1 amd64 2:1.02.48-4ubuntu7.1 [69.7 kB]
Get:42 http://archive.ubuntu.com/ubuntu/ precise/main libparted0debian1 amd64 2.3-8ubuntu5 [240 kB]
Get:43 http://archive.ubuntu.com/ubuntu/ precise/main libpci3 amd64 1:3.1.8-2ubuntu5 [25.9 kB]
Get:44 http://archive.ubuntu.com/ubuntu/ precise/main libusb-1.0-0 amd64 2:1.0.9~rc3-2ubuntu1 [31.0 kB]
Get:45 http://archive.ubuntu.com/ubuntu/ precise-security/main libxml2 amd64 2.7.8.dfsg-5.1ubuntu4.1 [673 kB]
Get:46 http://archive.ubuntu.com/ubuntu/ precise/main libfreetype6 amd64 2.4.8-1ubuntu2 [343 kB]
Get:47 http://archive.ubuntu.com/ubuntu/ precise/main libreadline5 amd64 5.2-11 [128 kB]
Get:48 http://archive.ubuntu.com/ubuntu/ precise/main libapr1 amd64 1.4.6-1 [89.6 kB]
Get:49 http://archive.ubuntu.com/ubuntu/ precise/main libaprutil1 amd64 1.3.12+dfsg-3 [74.6 kB]
Get:50 http://archive.ubuntu.com/ubuntu/ precise/main libneon27-gnutls amd64 0.29.6-1 [76.7 kB]
Get:51 http://archive.ubuntu.com/ubuntu/ precise/main libsvn1 amd64 1.6.17dfsg-3ubuntu3 [820 kB]
Get:52 http://archive.ubuntu.com/ubuntu/ precise/main insserv amd64 1.14.0-2.1ubuntu2 [50.9 kB]
Get:53 http://archive.ubuntu.com/ubuntu/ precise/main less amd64 444-1ubuntu1 [114 kB]
Get:54 http://archive.ubuntu.com/ubuntu/ precise/main ucf all 3.0025+nmu2ubuntu1 [54.4 kB]
Get:55 http://archive.ubuntu.com/ubuntu/ precise/main iproute amd64 20111117-1ubuntu2 [442 kB]
Get:56 http://archive.ubuntu.com/ubuntu/ precise/main libgeoip1 amd64 1.4.8+dfsg-2 [105 kB]
Get:57 http://archive.ubuntu.com/ubuntu/ precise-security/main libisc83 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [161 kB]
Get:58 http://archive.ubuntu.com/ubuntu/ precise-security/main libdns81 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [703 kB]
Get:59 http://archive.ubuntu.com/ubuntu/ precise-security/main libisccc80 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [17.6 kB]
Get:60 http://archive.ubuntu.com/ubuntu/ precise-security/main libisccfg82 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [43.4 kB]
Get:61 http://archive.ubuntu.com/ubuntu/ precise-security/main libbind9-80 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [24.3 kB]
Get:62 http://archive.ubuntu.com/ubuntu/ precise-security/main liblwres80 amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [38.2 kB]
Get:63 http://archive.ubuntu.com/ubuntu/ precise-security/main bind9-host amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [55.5 kB]
Get:64 http://archive.ubuntu.com/ubuntu/ precise-security/main dnsutils amd64 1:9.8.1.dfsg.P1-4ubuntu0.1 [148 kB]
Get:65 http://archive.ubuntu.com/ubuntu/ precise/main dosfstools amd64 3.0.12-1ubuntu1 [75.9 kB]
Get:66 http://archive.ubuntu.com/ubuntu/ precise/main gettext-base amd64 0.18.1.1-5ubuntu3 [80.0 kB]
Get:67 http://archive.ubuntu.com/ubuntu/ precise-updates/main hdparm amd64 9.37-0ubuntu3.1 [92.3 kB]
Get:68 http://archive.ubuntu.com/ubuntu/ precise/main libcap-ng0 amd64 0.6.6-1ubuntu1 [11.0 kB]
Get:69 http://archive.ubuntu.com/ubuntu/ precise/main libfuse2 amd64 2.8.6-2ubuntu2 [108 kB]
Get:70 http://archive.ubuntu.com/ubuntu/ precise/main lshw amd64 02.15-2 [278 kB]
Get:71 http://archive.ubuntu.com/ubuntu/ precise/main parted amd64 2.3-8ubuntu5 [52.1 kB]
Get:72 http://archive.ubuntu.com/ubuntu/ precise/main pciutils amd64 1:3.1.8-2ubuntu5 [240 kB]
Get:73 http://archive.ubuntu.com/ubuntu/ precise/main psmisc amd64 22.15-2ubuntu1 [54.7 kB]
Get:74 http://archive.ubuntu.com/ubuntu/ precise/main rsync amd64 3.0.9-1ubuntu1 [310 kB]
Get:75 http://archive.ubuntu.com/ubuntu/ precise/main usbutils amd64 1:005-1 [217 kB]
Get:76 http://archive.ubuntu.com/ubuntu/ precise/universe cfengine2 amd64 2.2.10-4build2 [2748 kB]
Get:77 http://archive.ubuntu.com/ubuntu/ precise/universe dialog amd64 1.1-20111020-1 [280 kB]
Get:78 http://archive.ubuntu.com/ubuntu/ precise/universe discover-data all 2.2010.10.18 [429 kB]
Get:79 http://archive.ubuntu.com/ubuntu/ precise/universe libdiscover2 amd64 2.1.2-5.1 [85.7 kB]
Get:80 http://archive.ubuntu.com/ubuntu/ precise/universe discover amd64 2.1.2-5.1 [26.2 kB]
Get:81 http://archive.ubuntu.com/ubuntu/ precise/universe dump amd64 0.4b44-1ubuntu1 [252 kB]
Get:82 http://archive.ubuntu.com/ubuntu/ precise-updates/main grub-common amd64 1.99-21ubuntu3.1 [2066 kB]
Get:83 http://archive.ubuntu.com/ubuntu/ precise-updates/main grub2-common amd64 1.99-21ubuntu3.1 [94.3 kB]
Get:84 http://archive.ubuntu.com/ubuntu/ precise-updates/main grub-pc-bin amd64 1.99-21ubuntu3.1 [861 kB]
Get:85 http://archive.ubuntu.com/ubuntu/ precise-updates/main grub-pc amd64 1.99-21ubuntu3.1 [140 kB]
Get:86 http://archive.ubuntu.com/ubuntu/ precise/main grub-gfxpayload-lists amd64 0.6 [3506 B]
Get:87 http://archive.ubuntu.com/ubuntu/ precise/universe libhal1 amd64 0.5.14-8 [78.4 kB]
Get:88 http://archive.ubuntu.com/ubuntu/ precise/universe libhd16 amd64 16.0-2.1 [672 kB]
Get:89 http://archive.ubuntu.com/ubuntu/ precise/universe hwinfo amd64 16.0-2.1 [18.5 kB]
Get:90 http://archive.ubuntu.com/ubuntu/ precise/universe jove amd64 4.16.0.72-2.2 [206 kB]
Get:91 http://archive.ubuntu.com/ubuntu/ precise/main lftp amd64 4.3.3-1 [458 kB]
Get:92 http://archive.ubuntu.com/ubuntu/ precise-updates/main libdevmapper-event1.02.1 amd64 2:1.02.48-4ubuntu7.1 [10.4 kB]
Get:93 http://archive.ubuntu.com/ubuntu/ precise/main watershed amd64 6 [11.8 kB]
Get:94 http://archive.ubuntu.com/ubuntu/ precise-updates/main lvm2 amd64 2.02.66-4ubuntu7.1 [410 kB]
Get:95 http://archive.ubuntu.com/ubuntu/ precise/universe procinfo amd64 1:2.0.304-1ubuntu1 [51.8 kB]
Get:96 http://archive.ubuntu.com/ubuntu/ precise/main rdate amd64 1:1.2-4build1 [16.7 kB]
Get:97 http://archive.ubuntu.com/ubuntu/ precise/main reiserfsprogs amd64 1:3.6.21-1build1 [529 kB]
Get:98 http://archive.ubuntu.com/ubuntu/ precise/main smartmontools amd64 5.41+svn3365-1 [458 kB]
Get:99 http://archive.ubuntu.com/ubuntu/ precise/main subversion amd64 1.6.17dfsg-3ubuntu3 [295 kB]
Get:100 http://archive.ubuntu.com/ubuntu/ precise/main xfsprogs amd64 3.1.7 [1226 kB]
Get:101 http://archive.ubuntu.com/ubuntu/ precise/main xfsdump amd64 3.0.6 [283 kB]
Extracting templates from packages: 29%
Extracting templates from packages: 59%
Extracting templates from packages: 89%
Extracting templates from packages: 100%
Preconfiguring packages ...
Fetched 24.5 MB in 3min 56s (103 kB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8529 files and directories currently installed.)
Preparing to replace debianutils 3.4 (using .../debianutils_4.2.1ubuntu2_amd64.deb) ...
Unpacking replacement debianutils ...
Processing triggers for man-db ...
Setting up debianutils (4.2.1ubuntu2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8555 files and directories currently installed.)
Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42-1ubuntu2_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Setting up libcomerr2 (1.42-1ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8555 files and directories currently installed.)
Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42-1ubuntu2_amd64.deb) ...
Unpacking replacement e2fslibs ...
Setting up e2fslibs (1.42-1ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8555 files and directories currently installed.)
Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42-1ubuntu2_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Processing triggers for man-db ...
Setting up e2fsprogs (1.42-1ubuntu2) ...
Installing new version of config file /etc/mke2fs.conf ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8551 files and directories currently installed.)
Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-5ubuntu1_amd64.deb) ...
Unpacking replacement libacl1 ...
Setting up libacl1 (2.2.51-5ubuntu1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Selecting previously deselected package libexpat1.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8550 files and directories currently installed.)
Unpacking libexpat1 (from .../libexpat1_2.0.1-7.2ubuntu1_amd64.deb) ...
Selecting previously deselected package libssl1.0.0.
Unpacking libssl1.0.0 (from .../libssl1.0.0_1.0.1-4ubuntu5.2_amd64.deb) ...
Selecting previously deselected package ntpdate.
Unpacking ntpdate (from .../ntpdate_1%3a4.2.6.p3+dfsg-1ubuntu3.1_amd64.deb) ...
Selecting previously deselected package libdb5.1.
Unpacking libdb5.1 (from .../libdb5.1_5.1.25-11build1_amd64.deb) ...
Selecting previously deselected package libdbus-1-3.
Unpacking libdbus-1-3 (from .../libdbus-1-3_1.4.18-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libpng12-0.
Unpacking libpng12-0 (from .../libpng12-0_1.2.46-3ubuntu4_amd64.deb) ...
Selecting previously deselected package libtinfo5.
Unpacking libtinfo5 (from .../libtinfo5_5.9-4_amd64.deb) ...
Selecting previously deselected package libroken18-heimdal.
Unpacking libroken18-heimdal (from .../libroken18-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libasn1-8-heimdal.
Unpacking libasn1-8-heimdal (from .../libasn1-8-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libbsd0.
Unpacking libbsd0 (from .../libbsd0_0.3.0-2_amd64.deb) ...
Selecting previously deselected package libgpg-error0.
Unpacking libgpg-error0 (from .../libgpg-error0_1.10-2ubuntu1_amd64.deb) ...
Selecting previously deselected package libgcrypt11.
Unpacking libgcrypt11 (from .../libgcrypt11_1.5.0-3ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libp11-kit0.
Unpacking libp11-kit0 (from .../libp11-kit0_0.12-2ubuntu1_amd64.deb) ...
Selecting previously deselected package libtasn1-3.
Unpacking libtasn1-3 (from .../libtasn1-3_2.10-1ubuntu1.1_amd64.deb) ...
Selecting previously deselected package libgnutls26.
Unpacking libgnutls26 (from .../libgnutls26_2.12.14-5ubuntu3_amd64.deb) ...
Selecting previously deselected package libkrb5support0.
Unpacking libkrb5support0 (from .../libkrb5support0_1.10+dfsg~beta1-2ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libk5crypto3.
Unpacking libk5crypto3 (from .../libk5crypto3_1.10+dfsg~beta1-2ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libkeyutils1.
Unpacking libkeyutils1 (from .../libkeyutils1_1.5.2-2_amd64.deb) ...
Selecting previously deselected package libkrb5-3.
Unpacking libkrb5-3 (from .../libkrb5-3_1.10+dfsg~beta1-2ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libgssapi-krb5-2.
Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.10+dfsg~beta1-2ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libhcrypto4-heimdal.
Unpacking libhcrypto4-heimdal (from .../libhcrypto4-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libheimbase1-heimdal.
Unpacking libheimbase1-heimdal (from .../libheimbase1-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libwind0-heimdal.
Unpacking libwind0-heimdal (from .../libwind0-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libhx509-5-heimdal.
Unpacking libhx509-5-heimdal (from .../libhx509-5-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libkrb5-26-heimdal.
Unpacking libkrb5-26-heimdal (from .../libkrb5-26-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libheimntlm0-heimdal.
Unpacking libheimntlm0-heimdal (from .../libheimntlm0-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libgssapi3-heimdal.
Unpacking libgssapi3-heimdal (from .../libgssapi3-heimdal_1.6~git20120311.dfsg.1-2_amd64.deb) ...
Selecting previously deselected package libsasl2-2.
Unpacking libsasl2-2 (from .../libsasl2-2_2.1.25.dfsg1-3ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libldap-2.4-2.
Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.28-1.1ubuntu4_amd64.deb) ...
Selecting previously deselected package initramfs-tools-bin.
Unpacking initramfs-tools-bin (from .../initramfs-tools-bin_0.99ubuntu13_amd64.deb) ...
Selecting previously deselected package libklibc.
Unpacking libklibc (from .../libklibc_1.5.25-1ubuntu2_amd64.deb) ...
Selecting previously deselected package klibc-utils.
Unpacking klibc-utils (from .../klibc-utils_1.5.25-1ubuntu2_amd64.deb) ...
Selecting previously deselected package busybox-initramfs.
Unpacking busybox-initramfs (from .../busybox-initramfs_1%3a1.18.5-1ubuntu4_amd64.deb) ...
Selecting previously deselected package initramfs-tools.
Unpacking initramfs-tools (from .../initramfs-tools_0.99ubuntu13_all.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-4ubuntu7.1_amd64.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.48-4ubuntu7.1_amd64.deb) ...
Selecting previously deselected package libparted0debian1.
Unpacking libparted0debian1 (from .../libparted0debian1_2.3-8ubuntu5_amd64.deb) ...
Selecting previously deselected package libpci3.
Unpacking libpci3 (from .../libpci3_1%3a3.1.8-2ubuntu5_amd64.deb) ...
Selecting previously deselected package libusb-1.0-0.
Unpacking libusb-1.0-0 (from .../libusb-1.0-0_2%3a1.0.9~rc3-2ubuntu1_amd64.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-5.1ubuntu4.1_amd64.deb) ...
Selecting previously deselected package libfreetype6.
Unpacking libfreetype6 (from .../libfreetype6_2.4.8-1ubuntu2_amd64.deb) ...
Selecting previously deselected package libreadline5.
Unpacking libreadline5 (from .../libreadline5_5.2-11_amd64.deb) ...
Selecting previously deselected package libapr1.
Unpacking libapr1 (from .../libapr1_1.4.6-1_amd64.deb) ...
Selecting previously deselected package libaprutil1.
Unpacking libaprutil1 (from .../libaprutil1_1.3.12+dfsg-3_amd64.deb) ...
Selecting previously deselected package libneon27-gnutls.
Unpacking libneon27-gnutls (from .../libneon27-gnutls_0.29.6-1_amd64.deb) ...
Selecting previously deselected package libsvn1.
Unpacking libsvn1 (from .../libsvn1_1.6.17dfsg-3ubuntu3_amd64.deb) ...
Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-2.1ubuntu2_amd64.deb) ...
Unpacking replacement insserv ...
Processing triggers for man-db ...
Setting up insserv (1.14.0-2.1ubuntu2) ...
Installing new version of config file /etc/insserv.conf ...
Selecting previously deselected package less.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 9047 files and directories currently installed.)
Unpacking less (from .../less_444-1ubuntu1_amd64.deb) ...
Selecting previously deselected package ucf.
Unpacking ucf (from .../ucf_3.0025+nmu2ubuntu1_all.deb) ...
Moving old data out of the way
Preparing to replace iproute 20100519-3 (using .../iproute_20111117-1ubuntu2_amd64.deb) ...
Unpacking replacement iproute ...
Selecting previously deselected package libgeoip1.
Unpacking libgeoip1 (from .../libgeoip1_1.4.8+dfsg-2_amd64.deb) ...
Selecting previously deselected package libisc83.
Unpacking libisc83 (from .../libisc83_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libdns81.
Unpacking libdns81 (from .../libdns81_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libisccc80.
Unpacking libisccc80 (from .../libisccc80_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libisccfg82.
Unpacking libisccfg82 (from .../libisccfg82_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package libbind9-80.
Unpacking libbind9-80 (from .../libbind9-80_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package liblwres80.
Unpacking liblwres80 (from .../liblwres80_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package bind9-host.
Unpacking bind9-host (from .../bind9-host_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package dnsutils.
Unpacking dnsutils (from .../dnsutils_1%3a9.8.1.dfsg.P1-4ubuntu0.1_amd64.deb) ...
Selecting previously deselected package dosfstools.
Unpacking dosfstools (from .../dosfstools_3.0.12-1ubuntu1_amd64.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.1.1-5ubuntu3_amd64.deb) ...
Selecting previously deselected package hdparm.
Unpacking hdparm (from .../hdparm_9.37-0ubuntu3.1_amd64.deb) ...
dpkg: error processing /var/cache/apt/archives/hdparm_9.37-0ubuntu3.1_amd64.deb (--unpack):
subprocess new pre-installation script returned error exit status 255
configured to not write apport reports
Selecting previously deselected package libcap-ng0.
Unpacking libcap-ng0 (from .../libcap-ng0_0.6.6-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libfuse2.
Unpacking libfuse2 (from .../libfuse2_2.8.6-2ubuntu2_amd64.deb) ...
Selecting previously deselected package lshw.
Unpacking lshw (from .../lshw_02.15-2_amd64.deb) ...
Selecting previously deselected package parted.
Unpacking parted (from .../parted_2.3-8ubuntu5_amd64.deb) ...
Selecting previously deselected package pciutils.
Unpacking pciutils (from .../pciutils_1%3a3.1.8-2ubuntu5_amd64.deb) ...
Selecting previously deselected package psmisc.
Unpacking psmisc (from .../psmisc_22.15-2ubuntu1_amd64.deb) ...
Selecting previously deselected package rsync.
Unpacking rsync (from .../rsync_3.0.9-1ubuntu1_amd64.deb) ...
Selecting previously deselected package usbutils.
Unpacking usbutils (from .../usbutils_1%3a005-1_amd64.deb) ...
Selecting previously deselected package cfengine2.
Unpacking cfengine2 (from .../cfengine2_2.2.10-4build2_amd64.deb) ...
Selecting previously deselected package dialog.
Unpacking dialog (from .../dialog_1.1-20111020-1_amd64.deb) ...
Selecting previously deselected package discover-data.
Unpacking discover-data (from .../discover-data_2.2010.10.18_all.deb) ...
Selecting previously deselected package libdiscover2.
Unpacking libdiscover2 (from .../libdiscover2_2.1.2-5.1_amd64.deb) ...
Selecting previously deselected package discover.
Unpacking discover (from .../discover_2.1.2-5.1_amd64.deb) ...
Selecting previously deselected package dump.
Unpacking dump (from .../dump_0.4b44-1ubuntu1_amd64.deb) ...
Selecting previously deselected package grub-common.
Unpacking grub-common (from .../grub-common_1.99-21ubuntu3.1_amd64.deb) ...
Selecting previously deselected package grub2-common.
Unpacking grub2-common (from .../grub2-common_1.99-21ubuntu3.1_amd64.deb) ...
Selecting previously deselected package grub-pc-bin.
Unpacking grub-pc-bin (from .../grub-pc-bin_1.99-21ubuntu3.1_amd64.deb) ...
Selecting previously deselected package grub-pc.
Unpacking grub-pc (from .../grub-pc_1.99-21ubuntu3.1_amd64.deb) ...
Selecting previously deselected package grub-gfxpayload-lists.
Unpacking grub-gfxpayload-lists (from .../grub-gfxpayload-lists_0.6_amd64.deb) ...
Selecting previously deselected package libhal1.
Unpacking libhal1 (from .../libhal1_0.5.14-8_amd64.deb) ...
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_16.0-2.1_amd64.deb) ...
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_16.0-2.1_amd64.deb) ...
Selecting previously deselected package jove.
Unpacking jove (from .../jove_4.16.0.72-2.2_amd64.deb) ...
Selecting previously deselected package lftp.
Unpacking lftp (from .../lftp_4.3.3-1_amd64.deb) ...
Selecting previously deselected package libdevmapper-event1.02.1.
Unpacking libdevmapper-event1.02.1 (from .../libdevmapper-event1.02.1_2%3a1.02.48-4ubuntu7.1_amd64.deb) ...
Selecting previously deselected package watershed.
Unpacking watershed (from .../archives/watershed_6_amd64.deb) ...
Selecting previously deselected package lvm2.
Unpacking lvm2 (from .../lvm2_2.02.66-4ubuntu7.1_amd64.deb) ...
Selecting previously deselected package procinfo.
Unpacking procinfo (from .../procinfo_1%3a2.0.304-1ubuntu1_amd64.deb) ...
Selecting previously deselected package rdate.
Unpacking rdate (from .../rdate_1%3a1.2-4build1_amd64.deb) ...
Selecting previously deselected package reiserfsprogs.
Unpacking reiserfsprogs (from .../reiserfsprogs_1%3a3.6.21-1build1_amd64.deb) ...
Selecting previously deselected package smartmontools.
Unpacking smartmontools (from .../smartmontools_5.41+svn3365-1_amd64.deb) ...
Selecting previously deselected package subversion.
Unpacking subversion (from .../subversion_1.6.17dfsg-3ubuntu3_amd64.deb) ...
Selecting previously deselected package xfsprogs.
Unpacking xfsprogs (from .../xfsprogs_3.1.7_amd64.deb) ...
Selecting previously deselected package xfsdump.
Unpacking xfsdump (from .../xfsdump_3.0.6_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for install-info ...
Errors were encountered while processing:
/var/cache/apt/archives/hdparm_9.37-0ubuntu3.1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install. Trying to recover:
Setting up libfreetype6 (2.4.8-1ubuntu2) ...
Setting up libxml2 (2.7.8.dfsg-5.1ubuntu4.1) ...
Setting up libssl1.0.0 (1.0.1-4ubuntu5.2) ...
Setting up libdbus-1-3 (1.4.18-1ubuntu1) ...
Setting up gettext-base (0.18.1.1-5ubuntu3) ...
Setting up libtasn1-3 (2.10-1ubuntu1.1) ...
Setting up libgeoip1 (1.4.8+dfsg-2) ...
Setting up libfuse2 (2.8.6-2ubuntu2) ...
Setting up libpci3 (1:3.1.8-2ubuntu5) ...
Setting up libgpg-error0 (1.10-2ubuntu1) ...
Setting up ucf (3.0025+nmu2ubuntu1) ...
Setting up libisc83 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up pciutils (1:3.1.8-2ubuntu5) ...
Setting up libusb-1.0-0 (2:1.0.9~rc3-2ubuntu1) ...
Setting up discover-data (2.2010.10.18) ...
Setting up libroken18-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libklibc (1.5.25-1ubuntu2) ...
Setting up jove (4.16.0.72-2.2) ...
update-alternatives: using /usr/bin/jove to provide /usr/bin/editor (editor) in auto mode.
update-alternatives: using /usr/bin/jove to provide /usr/bin/emacs (emacs) in auto mode.
Reinstalling init script for new runlevels ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 393.
update-rc.d: error: insserv rejected the script header
dpkg: error processing jove (--configure):
subprocess installed post-installation script returned error exit status 255
Setting up rsync (3.0.9-1ubuntu1) ...
update-rc.d: using dependency based boot sequencing
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 393.
update-rc.d: error: insserv rejected the script header
dpkg: error processing rsync (--configure):
subprocess installed post-installation script returned error exit status 255
Setting up libwind0-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libkeyutils1 (1.5.2-2) ...
Setting up libexpat1 (2.0.1-7.2ubuntu1) ...
Setting up initramfs-tools-bin (0.99ubuntu13) ...
Setting up usbutils (1:005-1) ...
Setting up libhal1 (0.5.14-8) ...
Setting up liblwres80 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up lshw (02.15-2) ...
Setting up klibc-utils (1.5.25-1ubuntu2) ...
Setting up libkrb5support0 (1.10+dfsg~beta1-2ubuntu0.1) ...
Setting up libbsd0 (0.3.0-2) ...
Setting up dosfstools (3.0.12-1ubuntu1) ...
Setting up libdb5.1 (5.1.25-11build1) ...
Setting up libcap-ng0 (0.6.6-1ubuntu1) ...
Setting up busybox-initramfs (1:1.18.5-1ubuntu4) ...
Setting up libdiscover2 (2.1.2-5.1) ...
Setting up dump (0.4b44-1ubuntu1) ...
update-alternatives: using /usr/sbin/rmt-dump to provide /usr/sbin/rmt (rmt) in auto mode.
Setting up libheimbase1-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libasn1-8-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libtinfo5 (5.9-4) ...
Setting up cfengine2 (2.2.10-4build2) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing cfengine2 (--configure):
subprocess installed post-installation script returned error exit status 255
Setting up libisccc80 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up libp11-kit0 (0.12-2ubuntu1) ...
Setting up ntpdate (1:4.2.6.p3+dfsg-1ubuntu3.1) ...
Setting up libpng12-0 (1.2.46-3ubuntu4) ...
Setting up discover (2.1.2-5.1) ...
Setting up reiserfsprogs (1:3.6.21-1build1) ...
Setting up less (444-1ubuntu1) ...
Setting up libapr1 (1.4.6-1) ...
Setting up smartmontools (5.41+svn3365-1) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing smartmontools (--configure):
subprocess installed post-installation script returned error exit status 255
Setting up initramfs-tools (0.99ubuntu13) ...
update-initramfs: deferring update (trigger activated)
Setting up libgcrypt11 (1.5.0-3ubuntu0.1) ...
Setting up libhd16 (16.0-2.1) ...
Setting up procinfo (1:2.0.304-1ubuntu1) ...
Setting up psmisc (22.15-2ubuntu1) ...
Setting up hwinfo (16.0-2.1) ...
Setting up libk5crypto3 (1.10+dfsg~beta1-2ubuntu0.1) ...
Setting up libhcrypto4-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libreadline5 (5.2-11) ...
Setting up rdate (1:1.2-4build1) ...
Setting up iproute (20111117-1ubuntu2) ...
Setting up watershed (6) ...
update-initramfs: deferring update (trigger activated)
Setting up libaprutil1 (1.3.12+dfsg-3) ...
Setting up libsasl2-2 (2.1.25.dfsg1-3ubuntu0.1) ...
Setting up libgnutls26 (2.12.14-5ubuntu3) ...
Setting up dialog (1.1-20111020-1) ...
Setting up libkrb5-3 (1.10+dfsg~beta1-2ubuntu0.1) ...
Setting up libgssapi-krb5-2 (1.10+dfsg~beta1-2ubuntu0.1) ...
Setting up lftp (4.3.3-1) ...
Setting up xfsprogs (3.1.7) ...
Setting up libhx509-5-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libneon27-gnutls (0.29.6-1) ...
Setting up xfsdump (3.0.6) ...
Setting up libkrb5-26-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libdns81 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up libisccfg82 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up libsvn1 (1.6.17dfsg-3ubuntu3) ...
Setting up libheimntlm0-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libgssapi3-heimdal (1.6~git20120311.dfsg.1-2) ...
Setting up libldap-2.4-2 (2.4.28-1.1ubuntu4) ...
Setting up libbind9-80 (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up subversion (1.6.17dfsg-3ubuntu3) ...
Setting up bind9-host (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up dnsutils (1:9.8.1.dfsg.P1-4ubuntu0.1) ...
Setting up libdevmapper1.02.1 (2:1.02.48-4ubuntu7.1) ...
Setting up libdevmapper-event1.02.1 (2:1.02.48-4ubuntu7.1) ...
Setting up grub-gfxpayload-lists (0.6) ...
Setting up dmsetup (2:1.02.48-4ubuntu7.1) ...
update-initramfs: deferring update (trigger activated)
Setting up libparted0debian1 (2.3-8ubuntu5) ...
Setting up lvm2 (2.02.66-4ubuntu7.1) ...
update-initramfs: deferring update (trigger activated)
Setting up grub-common (1.99-21ubuntu3.1) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing grub-common (--configure):
subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of grub-pc-bin:
grub-pc-bin depends on grub-common (= 1.99-21ubuntu3.1); however:
Package grub-common is not configured yet.
dpkg: error processing grub-pc-bin (--configure):
dependency problems - leaving unconfigured
Setting up parted (2.3-8ubuntu5) ...
dpkg: dependency problems prevent configuration of grub-pc:
grub-pc depends on grub-common; however:
Package grub-common is not configured yet.
grub-pc depends on grub-pc-bin (= 1.99-21ubuntu3.1); however:
Package grub-pc-bin is not configured yet.
dpkg: error processing grub-pc (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of grub2-common:
grub2-common depends on grub-common (= 1.99-21ubuntu3.1); however:
Package grub-common is not configured yet.
dpkg: error processing grub2-common (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for initramfs-tools ...
Errors were encountered while processing:
jove
rsync
cfengine2
smartmontools
grub-common
grub-pc-bin
grub-pc
grub2-common
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Reading task descriptions...
ERROR: 65280 65280
ERROR: chroot /srv/fai/nfsroot/live/filesystem.dir aptitude -R -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install nfs-common fai-nfsroot module-init-tools ssh rdate lshw portmap rsync lftp less dump reiserfsprogs e2fsprogs usbutils hwinfo psmisc pciutils hdparm smartmontools parted mdadm lvm2 dnsutils ntpdate dosfstools jove xfsprogs xfsdump procinfo dialog discover console-setup console-common iproute udev subversion liblinux-lvm-perl cfengine2 libapt-pkg-perl grub-pc lilo linux-image-server-amd64 return code 255
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir apt-get clean
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir dpkg --configure --pending
Setting up grub-common (1.99-21ubuntu3.1) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing grub-common (--configure):
subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of grub-pc-bin:
grub-pc-bin depends on grub-common (= 1.99-21ubuntu3.1); however:
Package grub-common is not configured yet.
dpkg: error processing grub-pc-bin (--configure):
dependency problems - leaving unconfigured
Setting up jove (4.16.0.72-2.2) ...
Reinstalling init script for new runlevels ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 393.
update-rc.d: error: insserv rejected the script header
dpkg: error processing jove (--configure):
subprocess installed post-installation script returned error exit status 255
Setting up rsync (3.0.9-1ubuntu1) ...
update-rc.d: using dependency based boot sequencing
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 393.
update-rc.d: error: insserv rejected the script header
dpkg: error processing rsync (--configure):
subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of grub-pc:
grub-pc depends on grub-common; however:
Package grub-common is not configured yet.
grub-pc depends on grub-pc-bin (= 1.99-21ubuntu3.1); however:
Package grub-pc-bin is not configured yet.
dpkg: error processing grub-pc (--configure):
dependency problems - leaving unconfigured
Setting up cfengine2 (2.2.10-4build2) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing cfengine2 (--configure):
subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of grub2-common:
grub2-common depends on grub-common (= 1.99-21ubuntu3.1); however:
Package grub-common is not configured yet.
dpkg: error processing grub2-common (--configure):
dependency problems - leaving unconfigured
Setting up smartmontools (5.41+svn3365-1) ...
Can't exec "insserv": No such file or directory at /usr/sbin/update-rc.d line 417.
update-rc.d: error: insserv rejected the script header
dpkg: error processing smartmontools (--configure):
subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
grub-common
grub-pc-bin
jove
rsync
grub-pc
cfengine2
grub2-common
smartmontools
ERROR: 256 256
ERROR: chroot /srv/fai/nfsroot/live/filesystem.dir dpkg --configure --pending return code 1
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir dpkg -C
The following packages have been unpacked but not yet configured.
They must be configured using dpkg --configure or the configure
menu option in dselect for them to work:
grub-pc-bin GRand Unified Bootloader, version 2 (PC/BIOS binaries)
grub-pc GRand Unified Bootloader, version 2 (PC/BIOS version)
grub2-common GRand Unified Bootloader (common files for version 2)
The following packages are only half configured, probably due to problems
configuring them the first time. The configuration should be retried using
dpkg --configure <package> or the configure menu option in dselect:
grub-common GRand Unified Bootloader (common files)
jove Jonathan's Own Version of Emacs - a compact, powerful edi
rsync fast, versatile, remote (and local) file-copying tool
cfengine2 Tool for configuring and maintaining network machines
smartmontools control and monitor storage systems using S.M.A.R.T.
install_packages: executing chroot /srv/fai/nfsroot/live/filesystem.dir apt-get clean
2 errors during executing of commands
install_packages exit code: 3
cp: la cible «/srv/fai/nfsroot/live/filesystem.dir/etc/fai» n'est pas un répertoire
/usr/sbin/make-fai-nfsroot: ligne 229: /srv/fai/nfsroot/live/filesystem.dir/etc/fai/fai.conf: Aucun fichier ou dossier de ce type
Shadow passwords are now on.
ln: impossible de créer le lien symbolique «etc/init.d/rcS»: Le fichier existe
cp: impossible d'évaluer «/srv/fai/nfsroot/live/filesystem.dir/boot/vmlinu?-*»: Aucun fichier ou dossier de ce type
cp: impossible d'évaluer «/srv/fai/nfsroot/live/filesystem.dir/boot/initrd.img-*»: Aucun fichier ou dossier de ce type
DHCP environment prepared. If you want to use it, you have to enable the dhcpd and the tftp-hpa daemon.
ERROR: 1 live-initramfs was not installed inside the nfsroot.
Log file written to /var/log/fai/make-fai-nfsroot.logEst-ce que ça parle à qqun ? Une idée ?
Merci d'avance pour votre aide.
Hors ligne
#2 Le 03/07/2012, à 19:26
- yzeew
Re : FAI sur ubuntu server 12.04
une idée ; voici http://wiki-oar.imag.fr/index.php/Squee … stallation
<==============================| Linux in the blood | Linux For Life |==================================>
<====================| OS Hôte: #! CrunchBang | OS VM: Back|Track 5 RC1 Vision OpenBox |=====================>
Hors ligne
#3 Le 04/07/2012, à 08:35
- hmp
Re : FAI sur ubuntu server 12.04
Merci pour ta réponse. Ce tuto fait partie des nombreux tutos que j'ai pu parcourir avant de me tourner vers http://fai-project.org
Mais ce qui m'ennuie, c'est que je n'ai pas l'impression que mon problème vienne de la configuration de fai mais plutôt de son intégration dans ubuntu. J'ai davantage l'impression de lever un bug du paquet fai ubuntu plutôt que de me planter sur la conf.
Du coup, je vous soumets le log de mise en place du nfsroot en espérant que qqun s'est déjà cassé les dents dessus et qu'il a une solution (un patch).
Selon moi, il y a un problème avec insserv, cherché par updaterc.d mais non trouvé. Le problème est que tout ça se passe dans un environnement chroot remis à zéro à chaque tentative de création par make-fai-nfsroot. Du coup, toute tentative de création d'un lien symbolique /sbin/insserv -> /etc/insserv est vaine. Ce qu'il faudrait plutôt, c'est qu'au moment de l'installation du système hôte, updaterc.d aille chercher insserv au bon endroit.
Bref, selon moi, le paquet fai sur ubuntu 12.04 LTS (ou une dépendance) est cassé. Sauf si vous avez une idée qui me prouve le contraire 
Hors ligne
#4 Le 10/07/2012, à 09:56
- hmp
Re : FAI sur ubuntu server 12.04
Bonjour,
Je confirme, c'est un soucis ubuntu puisque l'install puis le paramétrage de FAI sur une debian est passée comme une lettre à la poste, avec des fichiers de conf similaires.
Maintenant, j'expérimente un autre soucis que j'exposerai dans un autre post (un problème = un post).
Hors ligne
#5 Le 10/07/2012, à 17:59
- mazarini
Re : FAI sur ubuntu server 12.04
Le package base-files a disparu des dépots. Je viens de m'en rendre compte : package obsolète dans synaptic.
Surement un problème temporaire.
S'il existait une école de la politique, les locaux devraient être édifiés rue de la Santé. Les élèves pourraient s'habituer. (Pierre Dac)
Hors ligne
Pages : 1