#1 Le 13/02/2007, à 20:36
- vorach
beryl+ edgy + x550 ati = out beryl + feisty + x550 = splemdide
voila je tenais a partager mon experience par rapport a beryl et ma carte ATI x550 256Mo
j ai tester toutes les combinaisons possible et enviseagable sous edgy et je ai jamais reussi a faire fonctionné Beryl
Voila que j installe Feisty et beryl et la miracle tout fonctionne!!!
Sans même les pilotes propriétaire
voici mon xorg.conf pour ceux que sa interresse:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 [Sapphire X550 Silent]"
Driver "ati"
BusID "PCI:1:0:0"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Monitor"
Identifier "BenQ T705"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 [Sapphire X550 Silent]"
Monitor "BenQ T705"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionet ceux sans le moindre ralentissement ni même le moindre defaut :d
voila mon bureau est eye candy
Cordialement vorach
http://www.oralite.fr
http://www.attrapecoeurs.com
Mieux moins Meilleur ! L'avenir de la consommation
http : //www.lestroism.fr
Hors ligne
#2 Le 13/02/2007, à 23:03
- Siglihane
Re : beryl+ edgy + x550 ati = out beryl + feisty + x550 = splemdide
Tu es téméraire pour Béryl aprés l'échec sur Edgy. Mais c'est trés bien pour toi.
Je suis un peu dans le même avec nvidia : Beryl est une galère infernale avec ma geforce 7600 GT sur mes Edgy 32 et 64.
Pour ma Feisty -64 j'attends le herd4 pour tenter Beryl
Hors ligne
#3 Le 13/02/2007, à 23:14
- Luckynow
Re : beryl+ edgy + x550 ati = out beryl + feisty + x550 = splemdide
Comment sont les perfs avec ton driver libre pour beryl ?
Hors ligne
#4 Le 14/02/2007, à 12:15
- vorach
Re : beryl+ edgy + x550 ati = out beryl + feisty + x550 = splemdide
avec glxgears -printfps
9481 frames in 5.0 seconds = 1896.055 FPS
8698 frames in 5.0 seconds = 1739.519 FPS
9948 frames in 5.0 seconds = 1989.498 FPS
9961 frames in 5.0 seconds = 1992.096 FPS
9921 frames in 5.0 seconds = 1984.196 FPSce qui est plutot correct je pense ? non
http://www.oralite.fr
http://www.attrapecoeurs.com
Mieux moins Meilleur ! L'avenir de la consommation
http : //www.lestroism.fr
Hors ligne
#5 Le 14/02/2007, à 16:30
- Luckynow
Re : beryl+ edgy + x550 ati = out beryl + feisty + x550 = splemdide
Plutôt pas mal pour l'usage que demande beryl c'est plutôt suffisant je pense.
(Jamais essayer avec les drivers libres sur ati )
Hors ligne