Pages : 1
#1 Le 25/01/2021, à 09:48
- Hazeben
Problème carte Wifi sur Vaio [Résolu]
Bonjour,
Je possède un vieux Vaio SVF15A1M2ES que j'ai décider de recycler avec Lubuntu 20.04.01
Le soucis est que depuis je n'arrive pas à trouver mon réseau Wifi, j'ai déjà activer le driver dans "Additional drivers" en activant"Using source du pilote réseau sans fil Broadcom 802.11 Linux STA from bcmxl-krtnrl-doutvr (proprietary)" et tenté les différentes méthodes proposée sur les forum, mais apparemment je suis moins doué que dans ma jeunesse et je n'arrive pas a trouver mon Wifi
Auriez vous des suggestions ?
Merci d'avance
Dernière modification par Hazeben (Le 25/01/2021, à 13:51)
Hors ligne
#2 Le 25/01/2021, à 10:03
- xubu1957
Re : Problème carte Wifi sur Vaio [Résolu]
Bonjour,
Montre, en te servant du Retour utilisable de commande :
lspci -nnk | grep 0280 -A3uname -acqfd93 a écrit :
Astuce pour copier / coller sans erreur :
triple clic gauche pour sélectionner et copier une ligne entière
clic molette pour coller dans le terminal
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 25/01/2021, à 10:22
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
hazeben@Sauron:~$ hazeben@Sauron:~$
hazeben@Sauron:~$ lspci -nnk | grep 0280 -A3
07:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Foxconn International, Inc. BCM43142 802.11b/g/n [105b:e071]
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Sony Corporation RTS5209 PCI Express Card Reader [104d:90b7]Linux Sauron 5.4.0-64-generic #72-Ubuntu SMP Fri Jan 15 10:27:54 UTC 2021 x86_64 x86_64 x86_64 GNU/LinuxJ'espère que c'est le genre d'information que vous souhaitiez
Merci
Hors ligne
#4 Le 25/01/2021, à 10:25
- xubu1957
Re : Problème carte Wifi sur Vaio [Résolu]
Vu :
Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)L'ordi est de quelle année ?
A partir de 2012, voir le § 2 et le début du § 3 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier, pour désactiver le secure-boot.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 25/01/2021, à 10:50
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
L'ordi est de 2014 il me sembles, j'ai déjà enlevé le secure boot au début de mes essais, mais ça n'a rien changé...
Ce qui m'interpelle le plus, c'est que je n'ai aucun moyen pour chercher les réseaux wifi, j'ai cette horrible impression que la réponse est toute bête mais je n'y arrives pas...
en tout cas merci pour votre aide, ces forums me rappellent quand Internet était tellement plus...agréable 
Hors ligne
#6 Le 25/01/2021, à 10:54
- Nuliel
Re : Problème carte Wifi sur Vaio [Résolu]
Tu peux donner
rfkill listHors ligne
#7 Le 25/01/2021, à 11:15
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
Bien sûr, voici
hazeben@Sauron:~$ rfkill list
0: sony-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: sony-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
hazeben@Sauron:~$ Hors ligne
#8 Le 25/01/2021, à 11:18
- Nuliel
Re : Problème carte Wifi sur Vaio [Résolu]
Ah, tout est à no, c'est impec
Tu peux donner
sudo iwlist scanet s'il ne renvoit rien (en particulier pas ta box), tu peux redémarrer et donner le retour de
dmesg(le retour est long c'est normal)
Hors ligne
#9 Le 25/01/2021, à 11:25
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
hazeben@Sauron:~$ sudo iwlist scan
[sudo] password for hazeben:
enp14s0 Interface doesn't support scanning.
usb0 Interface doesn't support scanning.
lo Interface doesn't support scanning.[ 0.219840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.219842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.219844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.219845] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.219847] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.219848] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.219849] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.219851] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.219852] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.219854] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.219855] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.219856] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.219858] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.219859] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.219861] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.219862] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.219863] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.219865] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.219878] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.220000] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.220052] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.220174] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.220189] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.220197] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.220203] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.220219] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.220387] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.220415] pci 0000:00:14.0: reg 0x10: [mem 0xd1800000-0xd180ffff 64bit]
[ 0.220498] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.220620] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.220649] pci 0000:00:16.0: reg 0x10: [mem 0xd1814000-0xd181400f 64bit]
[ 0.220734] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.220842] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.220866] pci 0000:00:1a.0: reg 0x10: [mem 0xd1819000-0xd18193ff]
[ 0.220961] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.221083] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.221109] pci 0000:00:1b.0: reg 0x10: [mem 0xd1810000-0xd1813fff 64bit]
[ 0.221202] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.221318] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.221431] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.221554] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.221665] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.221786] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.221897] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.222028] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.222053] pci 0000:00:1d.0: reg 0x10: [mem 0xd1818000-0xd18183ff]
[ 0.222148] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.222264] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.222484] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.222506] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.222514] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.222523] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.222532] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.222541] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.222550] pci 0000:00:1f.2: reg 0x24: [mem 0xd1817000-0xd18177ff]
[ 0.222599] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222708] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.222731] pci 0000:00:1f.3: reg 0x10: [mem 0xd1815000-0xd18150ff 64bit]
[ 0.222753] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.222936] pci 0000:01:00.0: [10de:1291] type 00 class 0x030200
[ 0.222958] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.222972] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.222986] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.222995] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.223005] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.223024] pci 0000:01:00.0: Enabling HDA controller
[ 0.223088] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.223222] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.223224] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.223227] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.223231] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.223342] pci 0000:07:00.0: [14e4:4365] type 00 class 0x028000
[ 0.223393] pci 0000:07:00.0: reg 0x10: [mem 0xd1700000-0xd1707fff 64bit]
[ 0.223477] pci 0000:07:00.0: enabling Extended Tags
[ 0.223596] pci 0000:07:00.0: supports D1 D2
[ 0.223597] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.223771] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.223779] pci 0000:00:1c.0: bridge window [mem 0xd1700000-0xd17fffff]
[ 0.223922] pci 0000:08:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.224038] pci 0000:08:00.0: reg 0x10: [mem 0xd1600000-0xd1600fff]
[ 0.224589] pci 0000:08:00.0: supports D1 D2
[ 0.224590] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 0.224932] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.224939] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.225030] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000
[ 0.225069] pci 0000:0e:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.225105] pci 0000:0e:00.0: reg 0x18: [mem 0xd1500000-0xd1500fff 64bit]
[ 0.225128] pci 0000:0e:00.0: reg 0x20: [mem 0xd1400000-0xd1403fff 64bit pref]
[ 0.225266] pci 0000:0e:00.0: supports D1 D2
[ 0.225267] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225432] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.225436] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.225441] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.225447] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.226318] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226431] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226543] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226652] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226759] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226866] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.226972] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.227079] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.227351] ACPI: EC: interrupt unblocked
[ 0.227351] ACPI: EC: event unblocked
[ 0.227358] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.227358] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.227358] iommu: Default domain type: Translated
[ 0.227358] SCSI subsystem initialized
[ 0.227358] libata version 3.00 loaded.
[ 0.227358] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.227358] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.227358] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.227358] vgaarb: loaded
[ 0.227358] ACPI: bus type USB registered
[ 0.227358] usbcore: registered new interface driver usbfs
[ 0.227358] usbcore: registered new interface driver hub
[ 0.227358] usbcore: registered new device driver usb
[ 0.227358] pps_core: LinuxPPS API ver. 1 registered
[ 0.227358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.227358] PTP clock support registered
[ 0.227358] EDAC MC: Ver: 3.0.0
[ 0.228473] Registered efivars operations
[ 0.228500] PCI: Using ACPI for IRQ routing
[ 0.230193] PCI: pci_cache_line_size set to 64 bytes
[ 0.230287] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.230289] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.230290] e820: reserve RAM buffer [mem 0x93b7f018-0x93ffffff]
[ 0.230291] e820: reserve RAM buffer [mem 0x93b8d018-0x93ffffff]
[ 0.230293] e820: reserve RAM buffer [mem 0x93b9e018-0x93ffffff]
[ 0.230294] e820: reserve RAM buffer [mem 0x94d37000-0x97ffffff]
[ 0.230295] e820: reserve RAM buffer [mem 0x98798000-0x9bffffff]
[ 0.230297] e820: reserve RAM buffer [mem 0x9a7bf000-0x9bffffff]
[ 0.230298] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.230299] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.230441] NetLabel: Initializing
[ 0.230442] NetLabel: domain hash size = 128
[ 0.230443] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.230462] NetLabel: unlabeled traffic allowed by default
[ 0.230483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.230483] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.233494] clocksource: Switched to clocksource tsc-early
[ 0.250101] *** VALIDATE bpf ***
[ 0.250227] VFS: Disk quotas dquot_6.6.0
[ 0.250252] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250290] *** VALIDATE ramfs ***
[ 0.250295] *** VALIDATE hugetlbfs ***
[ 0.250401] AppArmor: AppArmor Filesystem Enabled
[ 0.250439] pnp: PnP ACPI init
[ 0.250666] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.250668] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.250671] system 00:00: [io 0xffff] has been reserved
[ 0.250673] system 00:00: [io 0xffff] has been reserved
[ 0.250674] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.250676] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.250678] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.250679] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.250687] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250722] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.250808] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.250813] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.250871] pnp 00:03: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
[ 0.250909] pnp 00:04: Plug and Play ACPI device, IDs SYN2706 SYN2700 SYN0002 PNP0f13 (active)
[ 0.251184] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.251186] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.251188] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.251190] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.251194] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.251196] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.251198] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.251200] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.251202] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.251204] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.251209] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251767] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.251769] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.251774] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.251789] pnp: PnP ACPI: found 7 devices
[ 0.253566] thermal_sys: Registered thermal governor 'fair_share'
[ 0.253567] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.253568] thermal_sys: Registered thermal governor 'step_wise'
[ 0.253569] thermal_sys: Registered thermal governor 'user_space'
[ 0.253570] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.258072] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.258116] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.258131] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.258134] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.258137] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.258140] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.258143] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.258147] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.258153] pci 0000:00:1c.0: bridge window [mem 0xd1700000-0xd17fffff]
[ 0.258164] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.258169] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.258180] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.258183] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.258189] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.258194] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.258201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.258203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.258204] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.258206] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.258208] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.258209] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.258211] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.258212] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.258214] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.258215] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.258217] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.258218] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.258220] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.258221] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.258223] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.258224] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.258226] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 0.258227] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.258229] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.258230] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.258232] pci_bus 0000:07: resource 1 [mem 0xd1700000-0xd17fffff]
[ 0.258234] pci_bus 0000:08: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.258235] pci_bus 0000:0e: resource 0 [io 0x2000-0x2fff]
[ 0.258236] pci_bus 0000:0e: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.258238] pci_bus 0000:0e: resource 2 [mem 0xd1400000-0xd14fffff 64bit pref]
[ 0.258375] NET: Registered protocol family 2
[ 0.258667] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.258727] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.258932] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.259062] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.259120] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.259153] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.259229] NET: Registered protocol family 1
[ 0.259236] NET: Registered protocol family 44
[ 0.259252] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.280621] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 19375 usecs
[ 0.300614] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 19501 usecs
[ 0.300669] PCI: CLS 64 bytes, default 64
[ 0.300722] Trying to unpack rootfs image as initramfs...
[ 0.586018] Initramfs unpacking failed: Decoding failed
[ 0.597183] Freeing initrd memory: 83960K
[ 0.624513] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.624515] software IO TLB: mapped [mem 0x8f1c0000-0x931c0000] (64MB)
[ 0.624767] check: Scanning for low memory corruption every 60 seconds
[ 0.625325] Initialise system trusted keyrings
[ 0.625338] Key type blacklist registered
[ 0.625369] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.627128] zbud: loaded
[ 0.627628] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.627841] fuse: init (API version 7.31)
[ 0.627865] *** VALIDATE fuse ***
[ 0.627867] *** VALIDATE fuse ***
[ 0.627992] Platform Keyring initialized
[ 0.633894] Key type asymmetric registered
[ 0.633895] Asymmetric key parser 'x509' registered
[ 0.633904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.633953] io scheduler mq-deadline registered
[ 0.634996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.635063] efifb: probing for efifb
[ 0.635095] efifb: showing boot graphics
[ 0.636582] efifb: framebuffer at 0xc0000000, using 8100k, total 8100k
[ 0.636583] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.636584] efifb: scrolling: redraw
[ 0.636586] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.636641] fbcon: Deferring console take-over
[ 0.636642] fb0: EFI VGA frame buffer device
[ 0.636652] intel_idle: MWAIT substates: 0x21120
[ 0.636654] intel_idle: v0.4.1 model 0x3A
[ 0.636890] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.637709] ACPI: AC Adapter [ACAD] (on-line)
[ 0.637786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.637810] ACPI: Power Button [PWRB]
[ 0.637854] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.637875] ACPI: Lid Switch [LID0]
[ 0.637912] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.637957] ACPI: Power Button [PWRF]
[ 0.642153] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.642155] ACPI: Thermal Zone [THRM] (33 C)
[ 0.642346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.645369] Linux agpgart interface v0.103
[ 0.648019] loop: module loaded
[ 0.648286] libphy: Fixed MDIO Bus: probed
[ 0.648287] tun: Universal TUN/TAP device driver, 1.6
[ 0.648328] PPP generic driver version 2.4.2
[ 0.648390] VFIO - User Level meta-driver version: 0.3
[ 0.648496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.648500] ehci-pci: EHCI PCI platform driver
[ 0.648697] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.648704] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.648719] ehci-pci 0000:00:1a.0: debug port 2
[ 0.652643] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.652666] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd1819000
[ 0.668477] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.668529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.668531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668533] usb usb1: Product: EHCI Host Controller
[ 0.668534] usb usb1: Manufacturer: Linux 5.4.0-64-generic ehci_hcd
[ 0.668536] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.668698] hub 1-0:1.0: USB hub found
[ 0.668706] hub 1-0:1.0: 2 ports detected
[ 0.669063] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.669068] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.669082] ehci-pci 0000:00:1d.0: debug port 2
[ 0.672999] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.673014] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1818000
[ 0.688477] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.688533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.688535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688537] usb usb2: Product: EHCI Host Controller
[ 0.688538] usb usb2: Manufacturer: Linux 5.4.0-64-generic ehci_hcd
[ 0.688539] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.688809] hub 2-0:1.0: USB hub found
[ 0.688818] hub 2-0:1.0: 2 ports detected
[ 0.689035] ehci-platform: EHCI generic platform driver
[ 0.689048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.689053] ohci-pci: OHCI PCI platform driver
[ 0.689066] ohci-platform: OHCI generic platform driver
[ 0.689074] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689259] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.689265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.690330] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.690336] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.690501] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.690502] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690504] usb usb3: Product: xHCI Host Controller
[ 0.690505] usb usb3: Manufacturer: Linux 5.4.0-64-generic xhci-hcd
[ 0.690507] usb usb3: SerialNumber: 0000:00:14.0
[ 0.690776] hub 3-0:1.0: USB hub found
[ 0.690790] hub 3-0:1.0: 4 ports detected
[ 0.691387] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.691393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.691396] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.691440] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.691442] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691443] usb usb4: Product: xHCI Host Controller
[ 0.691445] usb usb4: Manufacturer: Linux 5.4.0-64-generic xhci-hcd
[ 0.691446] usb usb4: SerialNumber: 0000:00:14.0
[ 0.691623] hub 4-0:1.0: USB hub found
[ 0.691634] hub 4-0:1.0: 4 ports detected
[ 0.692243] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.694722] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.694727] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.694929] mousedev: PS/2 mouse device common for all mice
[ 0.695284] rtc_cmos 00:01: RTC can wake from S4
[ 0.695516] rtc_cmos 00:01: registered as rtc0
[ 0.695535] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.695543] i2c /dev entries driver
[ 0.695595] device-mapper: uevent: version 1.0.3
[ 0.695711] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.695733] platform eisa.0: Probing EISA bus 0
[ 0.695735] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.695737] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.695738] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.695740] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.695741] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.695742] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.695744] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.695745] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.695746] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.695748] platform eisa.0: EISA: Detected 0 cards
[ 0.695756] intel_pstate: Intel P-state driver initializing
[ 0.695996] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.695998] EFI Variables Facility v0.08 2004-May-17
[ 0.717331] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.818468] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1.008483] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.028482] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.164871] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.164874] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.165158] hub 1-1:1.0: USB hub found
[ 1.165208] hub 1-1:1.0: 6 ports detected
[ 1.172336] drop_monitor: Initializing network drop monitor service
[ 1.172517] NET: Registered protocol family 10
[ 1.179033] Segment Routing with IPv6
[ 1.179057] NET: Registered protocol family 17
[ 1.179094] Key type dns_resolver registered
[ 1.179326] RAS: Correctable Errors collector initialized.
[ 1.179360] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.179399] microcode: Microcode Update Driver: v2.2.
[ 1.179404] IPI shorthand broadcast: enabled
[ 1.179410] sched_clock: Marking stable (1179078775, 316429)->(1197304465, -17909261)
[ 1.179483] registered taskstats version 1
[ 1.179492] Loading compiled-in X.509 certificates
[ 1.180335] Loaded X.509 cert 'Build time autogenerated kernel key: 7f1af841edfbf04e4b72462ffb6202c30b2da0bb'
[ 1.180362] zswap: loaded using pool lzo/zbud
[ 1.180424] Key type ._fscrypt registered
[ 1.180425] Key type .fscrypt registered
[ 1.184837] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.184840] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.185122] hub 2-1:1.0: USB hub found
[ 1.185218] hub 2-1:1.0: 6 ports detected
[ 1.186532] Key type big_key registered
[ 1.189373] Key type encrypted registered
[ 1.189377] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.206425] integrity: Loading X.509 certificate: UEFI:db
[ 1.206477] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.206478] integrity: Loading X.509 certificate: UEFI:db
[ 1.206508] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.239514] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.239551] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[ 1.239552] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.240067] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.259038] ima: No TPM chip found, activating TPM-bypass!
[ 1.259044] ima: Allocated hash algorithm: sha1
[ 1.259053] ima: No architecture policies found
[ 1.259070] evm: Initialising EVM extended attributes:
[ 1.259071] evm: security.selinux
[ 1.259072] evm: security.SMACK64
[ 1.259073] evm: security.SMACK64EXEC
[ 1.259073] evm: security.SMACK64TRANSMUTE
[ 1.259074] evm: security.SMACK64MMAP
[ 1.259075] evm: security.apparmor
[ 1.259075] evm: security.ima
[ 1.259076] evm: security.capability
[ 1.259077] evm: HMAC attrs: 0x1
[ 1.259620] PM: Magic number: 5:173:524
[ 1.259756] rtc_cmos 00:01: setting system clock to 2021-01-25T08:31:40 UTC (1611563500)
[ 1.261008] Freeing unused decrypted memory: 2040K
[ 1.261438] Freeing unused kernel image memory: 2724K
[ 1.280546] Write protecting the kernel read-only data: 22528k
[ 1.281045] Freeing unused kernel image memory: 2008K
[ 1.281256] Freeing unused kernel image memory: 1184K
[ 1.291667] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.291668] x86/mm: Checking user space page tables
[ 1.302278] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.302280] Run /init as init process
[ 1.407775] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.419492] libphy: r8169: probed
[ 1.419760] r8169 0000:0e:00.0 eth0: RTL8168g/8111g, 30:f9:ed:a0:55:40, XID 4c0, IRQ 32
[ 1.419763] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.441717] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.441796] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 1.441802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441807] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441812] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441818] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441825] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441830] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.LPCB.NFCM.GPIO) (20190816/utaddress-204)
[ 1.441838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441840] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-204)
[ 1.441847] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.441854] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB.PCI0.LPCB.NFCM.GPIO) (20190816/utaddress-204)
[ 1.441858] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\_SB.PCI0.LPCB.SNC.GPIO) (20190816/utaddress-204)
[ 1.441863] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.441864] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.442167] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.442170] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.445813] ahci 0000:00:1f.2: version 3.0
[ 1.446053] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.448241] cryptd: max_cpu_qlen set to 1000
[ 1.453415] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.456204] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.456207] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.458530] r8169 0000:0e:00.0 enp14s0: renamed from eth0
[ 1.465044] scsi host0: ahci
[ 1.465183] scsi host1: ahci
[ 1.465391] scsi host2: ahci
[ 1.465484] scsi host3: ahci
[ 1.465581] scsi host4: ahci
[ 1.465677] scsi host5: ahci
[ 1.465756] ata1: SATA max UDMA/133 abar m2048@0xd1817000 port 0xd1817100 irq 33
[ 1.465758] ata2: DUMMY
[ 1.465759] ata3: DUMMY
[ 1.465760] ata4: DUMMY
[ 1.465763] ata5: SATA max UDMA/133 abar m2048@0xd1817000 port 0xd1817300 irq 33
[ 1.465764] ata6: DUMMY
[ 1.485079] AVX version of gcm_enc/dec engaged.
[ 1.485081] AES CTR mode by8 optimization enabled
[ 1.526593] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
[ 1.526594] fb0: switching to inteldrmfb from EFI VGA
[ 1.526671] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.527306] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 1.527367] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 1.527721] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.527722] [drm] Driver supports precise vblank timestamp query.
[ 1.528050] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.528058] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.528079] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.528286] nouveau 0000:01:00.0: NVIDIA GK208 (108110a1)
[ 1.529008] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.554653] nouveau 0000:01:00.0: bios: version 80.28.22.00.25
[ 1.568855] usb 1-1.1: New USB device found, idVendor=03eb, idProduct=8813, bcdDevice=20.33
[ 1.568858] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.568860] usb 1-1.1: Product: Atmel maXTouch Digitizer
[ 1.568861] usb 1-1.1: Manufacturer: Atmel
[ 1.619339] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 1.619579] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 1.619701] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.619725] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.619865] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input6
[ 1.623443] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.623617] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 1.637436] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[ 1.637456] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[ 1.637474] clocksource: Switched to clocksource tsc
[ 1.648501] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.687191] vga_switcheroo: enabled
[ 1.687308] [TTM] Zone kernel: Available graphics memory: 4013980 KiB
[ 1.687309] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.687310] [TTM] Initializing pool allocator
[ 1.687313] [TTM] Initializing DMA pool allocator
[ 1.687329] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 1.687330] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 1.687333] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[ 1.687334] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 1.687956] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 1.688227] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 1.746130] fbcon: i915drmfb (fb0) is primary device
[ 1.746131] fbcon: Deferring console take-over
[ 1.746147] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.768294] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e062, bcdDevice= 1.12
[ 1.768296] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.768297] usb 1-1.2: Product: BCM43142A0
[ 1.768298] usb 1-1.2: Manufacturer: Broadcom Corp
[ 1.768299] usb 1-1.2: SerialNumber: 0C84DCF95110
[ 1.778850] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.828580] ata1.00: ATA-8: TOSHIBA MQ01ABD075H, AUF02H, max UDMA/100
[ 1.828583] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.830814] ata1.00: configured for UDMA/100
[ 1.830998] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 1.831527] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2H PQ: 0 ANSI: 5
[ 1.831905] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.831964] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.831967] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.831980] sd 0:0:0:0: [sda] Write Protect is off
[ 1.831982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.832004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.852524] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 1.852888] sda: sda1 sda2
[ 1.853262] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.866406] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 1.866412] psmouse serio1: synaptics: Your touchpad (PNP: SYN2706 SYN2700 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 1.929354] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 2692, fw id: 1338502
[ 1.968375] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.994240] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b3aa, bcdDevice=55.07
[ 1.994242] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.994244] usb 1-1.3: Product: Front Camera
[ 1.994245] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.994246] usb 1-1.3: SerialNumber: 0001
[ 2.001362] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.008031] usbcore: registered new interface driver usbhid
[ 2.008032] usbhid: USB HID core driver
[ 2.010837] input: Atmel Atmel maXTouch Digitizer Touchscreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input8
[ 2.011042] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input9
[ 2.011297] hid-generic 0003:03EB:8813.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[ 2.011471] hid-generic 0003:03EB:8813.0002: hiddev1,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1
[ 2.148324] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.150253] ata5.00: ATAPI: MATSHITADVD-RAM UJ8D3, 1.00, max UDMA/133
[ 2.153697] ata5.00: configured for UDMA/133
[ 2.157566] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D3 1.00 PQ: 0 ANSI: 5
[ 2.214731] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.214733] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.228992] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.229101] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.648466] raid6: sse2x4 gen() 10925 MB/s
[ 3.696468] raid6: sse2x4 xor() 7500 MB/s
[ 3.744466] raid6: sse2x2 gen() 9253 MB/s
[ 3.792463] raid6: sse2x2 xor() 6277 MB/s
[ 3.840471] raid6: sse2x1 gen() 7780 MB/s
[ 3.888469] raid6: sse2x1 xor() 5553 MB/s
[ 3.888470] raid6: using algorithm sse2x4 gen() 10925 MB/s
[ 3.888471] raid6: .... xor() 7500 MB/s, rmw enabled
[ 3.888472] raid6: using ssse3x2 recovery algorithm
[ 3.891616] xor: automatically using best checksumming function avx
[ 3.911016] Btrfs loaded, crc32c=crc32c-intel
[ 4.125784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.455027] systemd[1]: Inserted module 'autofs4'
[ 5.512713] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.532703] systemd[1]: Detected architecture x86-64.
[ 5.570253] systemd[1]: Set hostname to <Sauron>.
[ 6.851024] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 6.938411] systemd[1]: Created slice system-modprobe.slice.
[ 6.938671] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.938905] systemd[1]: Created slice User and Session Slice.
[ 6.938975] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.939204] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.939250] systemd[1]: Reached target User and Group Name Lookups.
[ 6.939266] systemd[1]: Reached target Remote File Systems.
[ 6.939277] systemd[1]: Reached target Slices.
[ 6.939292] systemd[1]: Reached target Swap.
[ 6.939379] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.939494] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.939590] systemd[1]: Listening on Syslog Socket.
[ 6.939684] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.939738] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.939936] systemd[1]: Listening on Journal Audit Socket.
[ 6.940031] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.940135] systemd[1]: Listening on Journal Socket.
[ 6.940234] systemd[1]: Listening on udev Control Socket.
[ 6.940312] systemd[1]: Listening on udev Kernel Socket.
[ 6.941306] systemd[1]: Mounting Huge Pages File System...
[ 6.942256] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.943477] systemd[1]: Mounting Kernel Debug File System...
[ 6.944917] systemd[1]: Mounting Kernel Trace File System...
[ 6.946861] systemd[1]: Starting Journal Service...
[ 6.948385] systemd[1]: Starting Availability of block devices...
[ 6.950180] systemd[1]: Starting Set the console keyboard layout...
[ 6.951650] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.953000] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.953062] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 6.956204] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.956261] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.958899] systemd[1]: Starting Load Kernel Modules...
[ 6.960420] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.961878] systemd[1]: Starting udev Coldplug all Devices...
[ 6.963399] systemd[1]: Starting Uncomplicated firewall...
[ 6.966310] systemd[1]: Mounted Huge Pages File System.
[ 6.967287] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.968873] systemd[1]: Mounted Kernel Debug File System.
[ 6.969709] systemd[1]: Mounted Kernel Trace File System.
[ 6.971145] systemd[1]: Finished Availability of block devices.
[ 6.974010] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.983368] systemd[1]: Finished Uncomplicated firewall.
[ 7.032997] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 7.093767] systemd[1]: Finished Set the console keyboard layout.
[ 7.254991] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.257138] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.258026] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 7.258066] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 7.259029] systemd[1]: Starting Load/Save Random Seed...
[ 7.260432] systemd[1]: Starting Create System Users...
[ 7.392833] lp: driver loaded but no devices found
[ 7.397975] ppdev: user-space parallel port driver
[ 7.402792] systemd[1]: Finished Load Kernel Modules.
[ 7.404204] systemd[1]: Mounting FUSE Control File System...
[ 7.405290] systemd[1]: Mounting Kernel Configuration File System...
[ 7.406726] systemd[1]: Starting Apply Kernel Variables...
[ 7.412255] systemd[1]: Mounted FUSE Control File System.
[ 7.412558] systemd[1]: Mounted Kernel Configuration File System.
[ 7.582734] systemd[1]: Finished Load/Save Random Seed.
[ 7.605604] systemd[1]: Finished udev Coldplug all Devices.
[ 7.607616] systemd[1]: Finished Create System Users.
[ 7.610407] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.639621] systemd[1]: Finished Apply Kernel Variables.
[ 7.647634] systemd[1]: Started Journal Service.
[ 7.775095] systemd-journald[336]: Received client request to flush runtime journal.
[ 7.938466] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 8.553356] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10
[ 8.553462] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input11
[ 8.707351] mei_me 0000:00:16.0: Could not read IF version
[ 8.774761] mc: Linux media interface: v0.10
[ 8.775295] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input12
[ 8.775429] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:8813.0001/input/input13
[ 8.775591] hid-multitouch 0003:03EB:8813.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[ 8.833009] videodev: Linux video capture interface: v2.00
[ 8.844772] nouveau 0000:01:00.0: Enabling HDA controller
[ 8.866904] Bluetooth: Core ver 2.22
[ 8.866922] NET: Registered protocol family 31
[ 8.866923] Bluetooth: HCI device and connection manager initialized
[ 8.866927] Bluetooth: HCI socket layer initialized
[ 8.866929] Bluetooth: L2CAP socket layer initialized
[ 8.866934] Bluetooth: SCO socket layer initialized
[ 8.877409] sony_laptop: SNC setup done.
[ 8.916611] uvcvideo: Found UVC 1.00 device Front Camera (04f2:b3aa)
[ 8.921108] usbcore: registered new interface driver btusb
[ 8.926715] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.926717] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.926718] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.926719] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 8.958566] input: Front Camera: Front Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 8.958733] usbcore: registered new interface driver uvcvideo
[ 8.958735] USB Video Class driver (1.1.1)
[ 8.987283] kvm: disabled by bios
[ 9.034929] Bluetooth: hci0: BCM: chip id 70
[ 9.035918] Bluetooth: hci0: BCM: features 0x06
[ 9.046772] kvm: disabled by bios
[ 9.051939] Bluetooth: hci0: BCM43142A
[ 9.055985] Bluetooth: hci0: BCM43142A0 (001.001.011) build 0000
[ 9.058245] bluetooth hci0: Direct firmware load for brcm/BCM43142A0-0489-e062.hcd failed with error -2
[ 9.058248] Bluetooth: hci0: BCM: Patch brcm/BCM43142A0-0489-e062.hcd not found
[ 9.124795] kvm: disabled by bios
[ 9.168912] kvm: disabled by bios
[ 9.343172] intel_rapl_common: Found RAPL domain package
[ 9.343174] intel_rapl_common: Found RAPL domain core
[ 9.343175] intel_rapl_common: Found RAPL domain uncore
[ 9.343181] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 9.354771] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.400363] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.400367] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.400369] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.400371] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.400372] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.400375] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 9.400376] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.483163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.483245] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 9.483327] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 10.146812] audit: type=1400 audit(1611563509.381:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=582 comm="apparmor_parser"
[ 10.157520] audit: type=1400 audit(1611563509.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=586 comm="apparmor_parser"
[ 10.158019] audit: type=1400 audit(1611563509.393:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=584 comm="apparmor_parser"
[ 10.163411] audit: type=1400 audit(1611563509.397:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=585 comm="apparmor_parser"
[ 10.163418] audit: type=1400 audit(1611563509.397:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=585 comm="apparmor_parser"
[ 10.163420] audit: type=1400 audit(1611563509.397:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=585 comm="apparmor_parser"
[ 10.164554] audit: type=1400 audit(1611563509.401:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=583 comm="apparmor_parser"
[ 10.167844] audit: type=1400 audit(1611563509.401:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=587 comm="apparmor_parser"
[ 10.167849] audit: type=1400 audit(1611563509.401:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=587 comm="apparmor_parser"
[ 10.169164] audit: type=1400 audit(1611563509.405:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=588 comm="apparmor_parser"
[ 11.072490] Bluetooth: hci0: command 0x1003 tx timeout
[ 11.073904] Bluetooth: hci0: unexpected event for opcode 0x1003
[ 11.703981] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.703982] Bluetooth: BNEP filters: protocol multicast
[ 11.703987] Bluetooth: BNEP socket layer initialized
[ 12.032678] NET: Registered protocol family 38
[ 12.139996] Bluetooth: RFCOMM TTY layer initialized
[ 12.140003] Bluetooth: RFCOMM socket layer initialized
[ 12.140009] Bluetooth: RFCOMM ver 1.11
[ 12.615976] Generic FE-GE Realtek PHY r8169-e00:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE)
[ 12.737323] r8169 0000:0e:00.0 enp14s0: Link is Down
[ 21.837171] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 384.802436] pci_bus 0000:07: Allocating resources
[ 384.802461] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 384.802473] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 384.802494] pci_bus 0000:08: Allocating resources
[ 384.802510] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 384.802518] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 384.802538] pci_bus 0000:0e: Allocating resources
[ 384.802615] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
[ 384.802658] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 384.802671] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 384.802681] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 616.464977] pci_bus 0000:07: Allocating resources
[ 616.465004] pci_bus 0000:08: Allocating resources
[ 616.465026] pci_bus 0000:0e: Allocating resources
[ 2693.184702] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2693.335099] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 2693.335106] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2693.335110] usb 3-3: Product: SAMSUNG_Android
[ 2693.335113] usb 3-3: Manufacturer: SAMSUNG
[ 2693.335116] usb 3-3: SerialNumber: RF8N310SK0A
[ 2697.852456] usb 3-3: USB disconnect, device number 2
[ 2698.548704] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 2698.676791] usb 3-3: Device not responding to setup address.
[ 2698.884757] usb 3-3: Device not responding to setup address.
[ 2699.092691] usb 3-3: device not accepting address 3, error -71
[ 2699.428701] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[ 2699.578264] usb 3-3: New USB device found, idVendor=04e8, idProduct=6863, bcdDevice= c.00
[ 2699.578271] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2699.578275] usb 3-3: Product: SAMSUNG_Android
[ 2699.578278] usb 3-3: Manufacturer: SAMSUNG
[ 2699.578281] usb 3-3: SerialNumber: RF8N310SK0A
[ 2699.611360] usbcore: registered new interface driver cdc_ether
[ 2699.615244] rndis_host 3-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, 7a:68:51:90:cf:ea
[ 2699.615481] usbcore: registered new interface driver rndis_host
[ 2876.702012] usb 3-2: new low-speed USB device number 5 using xhci_hcd
[ 2876.855038] usb 3-2: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 2876.855046] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2876.855050] usb 3-2: Product: USB Optical Mouse
[ 2876.862369] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1BCF:0005.0003/input/input18
[ 2876.922868] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2940.426913] nouveau 0000:01:00.0: Enabling HDA controller
[ 2946.641507] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 3161.861592] usb 3-3: USB disconnect, device number 4
[ 3161.861855] rndis_host 3-3:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-3, RNDIS device
[ 3161.862353] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr
[ 3161.862357] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending.
[ 3161.862365] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 3162.439610] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 3162.589405] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 3162.589412] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3162.589416] usb 3-3: Product: SAMSUNG_Android
[ 3162.589419] usb 3-3: Manufacturer: SAMSUNG
[ 3162.589423] usb 3-3: SerialNumber: RF8N310SK0A
[ 3164.793398] usb 3-3: USB disconnect, device number 6
[ 6066.683429] usb 3-3: new high-speed USB device number 7 using xhci_hcd
[ 6066.833265] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[ 6066.833272] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6066.833276] usb 3-3: Product: SAMSUNG_Android
[ 6066.833279] usb 3-3: Manufacturer: SAMSUNG
[ 6066.833282] usb 3-3: SerialNumber: RF8N310SK0A
[ 6082.574882] usb 3-3: USB disconnect, device number 7
[ 6083.099291] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[ 6083.248719] usb 3-3: New USB device found, idVendor=04e8, idProduct=6863, bcdDevice= c.00
[ 6083.248726] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6083.248730] usb 3-3: Product: SAMSUNG_Android
[ 6083.248734] usb 3-3: Manufacturer: SAMSUNG
[ 6083.248737] usb 3-3: SerialNumber: RF8N310SK0A
[ 6083.252316] rndis_host 3-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, b6:8d:d8:c8:da:00
hazeben@Sauron:~$ j'ai pas pu tout avoir...effectivement c'est long...
Hors ligne
#10 Le 25/01/2021, à 11:30
- xubu1957
Re : Problème carte Wifi sur Vaio [Résolu]
Tente :
sudo apt updatesudo apt install --reinstall bcmwl-kernel-sourceConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#11 Le 25/01/2021, à 11:31
- Nuliel
Re : Problème carte Wifi sur Vaio [Résolu]
Le bluetooth demande un fichier hcd, après je pense pas que cela dérange pour le wifi, mais je ne vois aucune trace.
As tu redémarré après avoir installé le pilote?
Hors ligne
#12 Le 25/01/2021, à 11:51
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
hazeben@Sauron:~$ sudo apt update
[sudo] password for hazeben:
Atteint :1 http://archive.ubuntu.com/ubuntu focal InRelease
Réception de :2 http://archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB]
Atteint :3 http://archive.canonical.com/ubuntu focal InRelease
Réception de :4 http://archive.ubuntu.com/ubuntu focal-backports InRelease [101 kB]
Réception de :5 http://security.ubuntu.com/ubuntu focal-security InRelease [109 kB]
Réception de :6 http://archive.ubuntu.com/ubuntu focal-updates/main i386 Packages [408 kB]
Réception de :7 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages [768 kB]
Réception de :8 http://security.ubuntu.com/ubuntu focal-security/main amd64 DEP-11 Metadata [24,3 kB]
Réception de :9 http://security.ubuntu.com/ubuntu focal-security/universe amd64 DEP-11 Metadata [56,6 kB]
Réception de :10 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 DEP-11 Metadata [264 kB]
Réception de :11 http://archive.ubuntu.com/ubuntu focal-updates/restricted amd64 Packages [137 kB]
Réception de :12 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages [727 kB]
Réception de :13 http://archive.ubuntu.com/ubuntu focal-updates/universe i386 Packages [538 kB]
Réception de :14 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 DEP-11 Metadata [299 kB]
Réception de :15 http://archive.ubuntu.com/ubuntu focal-updates/universe DEP-11 64x64 Icons [344 kB]
Réception de :16 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 Packages [16,6 kB]
Réception de :17 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 DEP-11 Metadata [2.468 B]
Réception de :18 http://archive.ubuntu.com/ubuntu focal-backports/universe amd64 DEP-11 Metadata [1.768 B]
3.910 ko réceptionnés en 3s (1.238 ko/s)
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
hazeben@Sauron:~$ sudo apt install --reinstall bcmwl-kernel-source
E: dpkg a été interrompu. Il est nécessaire d'utiliser « sudo dpkg --configure -a » pour corriger le problème.
hazeben@Sauron:~$ Pour information, je dois comprendre 5% de ce que vous me demandez de faire 
Hors ligne
#13 Le 25/01/2021, à 11:56
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
ah et oui j'ai redémarrer mon ordinateur après chaque manipulation
Hors ligne
#14 Le 25/01/2021, à 11:56
- xubu1957
Re : Problème carte Wifi sur Vaio [Résolu]
Lance :
sudo dpkg --configure -aConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#15 Le 25/01/2021, à 11:57
- Nuliel
Re : Problème carte Wifi sur Vaio [Résolu]
Ah, alors j'ajoute les explications:
lspci -nnk | grep 0280 -A3 permet de lister les périphériques PCI, ici c'est pour voir le modèle de carte wifi.
uname -a permet de connaître le noyau linux sur lequel tu es
secure boot c'est un système pour éviter que des programmes non signés soient chargés avec des droits importants (que ce soit grub ou des pilotes)
rfkill list permet en particulier de savoir si la carte wifi est bloquée matériellement (par un bouton) ou logiciellement.
sudo apt update permet de mettre à jour le cache de apt, ce qu'on doit faire avant de faire ses mises à jour
sudo apt install --reinstall bcmwl-kernel-source réinstalle le paquet bcmwl-kernel-source
sudo iwlist scan recherche les réseaux wifi alentours
dmesg permet de voir des logs relativement fournis (bref plein d'infos relative au démarrage)
Peux tu redémarrer et retester?
Dernière modification par Nuliel (Le 25/01/2021, à 11:57)
Hors ligne
#16 Le 25/01/2021, à 12:02
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
Merci pour les explications
hazeben@Sauron:~$ sudo dpkg --configure -a
[sudo] password for hazeben:
Paramétrage de bcmwl-kernel-source (6.30.223.271+bdcom-0ubuntu5) ...
Removing old bcmwl-6.30.223.271+bdcom DKMS files...
-------- Uninstall Beginning --------
Module: bcmwl
Version: 6.30.223.271+bdcom
Kernel: 5.4.0-64-generic (x86_64)
-------------------------------------
Status: This module version was INACTIVE for this kernel.
depmod.........
DKMS: uninstall completed.
------------------------------
Deleting module version: 6.30.223.271+bdcom
completely from the DKMS tree.
------------------------------
Done.
Loading new bcmwl-6.30.223.271+bdcom DKMS files...
Building for 5.4.0-64-generic
Building for architecture x86_64
Building initial module for 5.4.0-64-generic
Secure Boot not enabled on this system.
Done.
wl.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/5.4.0-64-generic/updates/dkms/
depmod...
DKMS: install completed.
update-initramfs: deferring update (trigger activated)
Paramétrage de build-essential (12.8ubuntu1.1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.1) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.136ubuntu6.3) ...
update-initramfs: Generating /boot/initrd.img-5.4.0-64-genericje redémarre à nouveau
Hors ligne
#17 Le 25/01/2021, à 13:25
- Hazeben
Re : Problème carte Wifi sur Vaio [Résolu]
Cette dernière manipulation à fonctionner, j'ai à présent les réseaux wifi qui s'affichent et je peux m'y connecter
Si quelqu'un a la patience de m'expliquer pourquoi, ce serait génial
C'est si bon de retrouver sur internet un peu d'entraide et de bienveillance, au contraire de ce que l'on lit sur les réseaux sociaux toute la journée.
Je vous remercie pour votre aide et je vous souhaite une excellente journée
Hors ligne
#18 Le 25/01/2021, à 13:28
- xubu1957
Re : Problème carte Wifi sur Vaio [Résolu]
On a forcé la réinstallation du pilote wifi bcmwl.
Pour éditer ta discussion et rajouter [Résolu], au début du titre et la carte Wi-FiBCM43142, il faut utiliser le bouton Modifier au bas de ton premier message.
Merci 
_ _ _
Montre d'éventuels paquets cassés :
dpkg -l | grep -v ^iiDernière modification par xubu1957 (Le 25/01/2021, à 13:29)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#19 Le 25/01/2021, à 22:44
- Nuliel
Re : Problème carte Wifi sur Vaio [Résolu]
Perso j'évite les réseaux (a)sociaux, comme ça je suis tranquille
sudo dpkg --configure -a a pour but de reconfigurer pas mal de paquets, notamment le paquet pour le wifi qui était mal configuré, ici via un script dkms qui va s'occuper à chaque changement de noyau de réinstaller le pilote wifi
Hors ligne
Pages : 1